Intel BLKD945GCLF Product Specification - Page 49
Jumper Block
UPC - 735858201254
View all Intel BLKD945GCLF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Technical Reference 2.3 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 12 shows the location of the jumper block. The jumper determines the BIOS Setup program's mode. Table 20 lists the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. Figure 12. Location of the Jumper Block Table 20. BIOS Setup Configuration Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Configure 2-3 321 After the POST runs, Setup runs automatically. The maintenance menu is displayed. Recovery None 321 321 The BIOS attempts to recover the BIOS configuration. See Section 3.7 for more information on BIOS recovery. 49