Intel BLKD945GTPLR Product Specification - Page 28

Audio Subsystem

Get Intel BLKD945GTPLR - Desktop Board D945GTP PDF manuals and user guides
UPC - 735858174725
View all Intel BLKD945GTPLR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Intel Desktop Board D945GTP Technical Product Specification 1.9 Audio Subsystem The board supports the Intel High Definition audio subsystem based on the Sigmatel 9223 or the Sigmatel 9220 audio codec. The audio subsystem supports the following features: • Advanced jack sense for the back panel audio jacks that enables the audio codec to recognize the device that is connected to an audio port. The back panel audio jacks are capable of retasking according to user's definition, or can be automatically switched depending on the recognized device type. • Stereo input and output for all back panel jacks • Line out and Mic in functions for front panel audio jacks • A signal-to-noise (S/N) ratio of 95 dB 1.9.1 Audio Subsystem Software Audio software and drivers are available from Intel's World Wide Web site. For information about Refer to Obtaining audio software and drivers Section 1.2, page 15 1.9.2 Audio Connectors The board contains audio connectors on both the back panel and the component side of the board. The front panel audio connector provides mic in and line out signals for the front panel. The functions of the back panel audio connectors are dependent on which subsystem is present. The 8-channel (7.1) audio subsystem is described in Section 1.9.3; the 6-channel (5.1) audio subsystem is described in Section 1.9.4. For information about The location of the front panel audio connector The signal names of the front panel audio connector The back panel audio connectors Refer to Figure 20, page 56 Table 19, page 58 Section 2.8.1, page 53 1.9.3 8-Channel (7.1) Audio Subsystem The 8-channel (7.1) audio subsystem includes the following: • Intel 82801G I/O Controller Hub (ICH7) • Sigmatel 9223 audio codec • Microphone input that supports a single dynamic, condenser, or electret microphone The back panel audio connectors are configurable through the audio device drivers. The available configurable audio ports are shown in Figure 9. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Intel Desktop Board D945GTP Technical Product Specification
28
1.9 Audio Subsystem
The board supports the Intel High Definition audio subsystem based on the Sigmatel 9223 or the
Sigmatel 9220 audio codec.
The audio subsystem supports the following features:
•
Advanced jack sense for the back panel audio jacks that enables the audio codec to recognize
the device that is connected to an audio port.
The back panel audio jacks are capable of
retasking according to user’s definition, or can be automatically switched depending on the
recognized device type.
•
Stereo input and output for all back panel jacks
•
Line out and Mic in functions for front panel audio jacks
•
A signal-to-noise (S/N) ratio of 95 dB
1.9.1
Audio Subsystem Software
Audio software and drivers are available from Intel’s World Wide Web site.
For information about
Refer to
Obtaining audio software and drivers
Section 1.2, page 15
1.9.2
Audio Connectors
The board contains audio connectors on both the back panel and the component side of the board.
The front panel audio connector provides mic in and line out signals for the front panel.
The
functions of the back panel audio connectors are dependent on which subsystem is present.
The
8-channel (7.1) audio subsystem is described in Section 1.9.3; the 6-channel (5.1) audio subsystem
is described in Section 1.9.4.
For information about
Refer to
The location of the front panel audio connector
Figure 20, page 56
The signal names of the front panel audio connector
Table 19, page 58
The back panel audio connectors
Section 2.8.1, page 53
1.9.3
8-Channel (7.1) Audio Subsystem
The 8-channel (7.1) audio subsystem includes the following:
•
Intel 82801G I/O Controller Hub (ICH7)
•
Sigmatel 9223 audio codec
•
Microphone input that supports a single dynamic, condenser, or electret microphone
The back panel audio connectors are configurable through the audio device drivers.
The available
configurable audio ports are shown in Figure 9.