Intel BOXDX58SO Product Guide - Page 14

Main Memory - specifications

Get Intel BOXDX58SO PDF manuals and user guides View all Intel BOXDX58SO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Intel Desktop Board DX58SO Product Guide Main Memory NOTE To be fully compliant with all applicable Intel ® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation. The Desktop Board supports the following memory features: • Four 240-pin Double Data Rate 3 (DDR3) SDRAM Dual Inline Memory Module (DIMM) connectors with gold-plated contacts arranged in three channels • 1333/1066/800 MHz DDR3 SDRAM interface • Support for single-, dual-, and triple-channel memory interleaving • Unbuffered, non-registered single or double-sided DIMMs with a voltage rating of less than 1.6 V. NOTE Using a DIMM with a voltage rating higher than 1.6 V may damage the processor. • Non-ECC DDR3 memory • Serial Presence Detect (SPD) memory only • Up to 16 GB maximum total system memory NOTE 32-bit operating systems are limited to a maximum of 4 GB of memory. The operating system report less than 4 GB because of the memory used by add-in graphics cards. Related Links: Go to the following links or pages for more information about: • SDRAM specifications, http://www.intel.com/technology/memory/ • Installing memory, page 38 in Chapter 2 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Intel Desktop Board DX58SO Product Guide
14
Main Memory
NOTE
To be fully compliant with all applicable Intel
®
SDRAM memory specifications, the
board should be populated with DIMMs that support the Serial Presence Detect (SPD)
data structure.
If your memory modules do not support SPD, you will see a
notification to this effect on the screen at power up.
The BIOS will attempt to
configure the memory controller for normal operation.
The Desktop Board supports the following memory features:
•
Four 240-pin Double Data Rate 3 (DDR3) SDRAM Dual Inline Memory Module
(DIMM) connectors with gold-plated contacts arranged in three channels
•
1333/1066/800 MHz DDR3 SDRAM interface
•
Support for single-, dual-, and triple-channel memory interleaving
•
Unbuffered, non-registered single or double-sided DIMMs with a voltage rating of
less than 1.6 V.
NOTE
Using a DIMM with a voltage rating higher than 1.6 V may damage the processor.
•
Non-ECC DDR3 memory
•
Serial Presence Detect (SPD) memory only
•
Up to 16 GB maximum total system memory
NOTE
32-bit operating systems are limited to a maximum of 4 GB of memory.
The
operating system report less than 4 GB because of the memory used by add-in
graphics cards.
Related Links:
Go to the following links or pages for more information about:
•
SDRAM specifications,
•
Installing memory, page 38 in Chapter 2