Intel D845HV Product Guide - Page 32
Installing and Removing the AGP Retention Mechanism and Card
View all Intel D845HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Intel Desktop Boards D845HV and D845WN Product Guide Installing and Removing the AGP Retention Mechanism and Card The AGP connector supports 1.5 V 4X and 2X AGP cards. Newer cards have a retention notch as shown in Figure 12. When using notched cards, install the AGP card retention mechanism (RM) before installing a card. The AGP card RM is not used with unnotched cards. Pages 22-35 describe: • Installing the AGP card RM • Installing an AGP card • Removing an AGP card from the AGP card RM • Removing the AGP card RM Installing the AGP Card Retention Mechanism CAUTION Install the AGP card RM only when using an AGP card with a retention notch (A) as shown in Figure 12. Use of the AGP card RM with an unnotched card may impair video operation. If you need to remove the AGP card RM, follow the instructions on page 35. ✏ NOTE All D845HV and D845WN boxed desktop boards may not include an AGP RM. See "Installing an AGP Card" on page 34 if your boxed desktop board does not include an AGP RM. A OM10592 Figure 12. AGP Card with Retention Notch 32