Intel DG35EC Product Specification - Page 32

ENERGY STAR, 13.1.3, Wake-up Devices and Events - acpi driver

Page 32 highlights

Intel Desktop Board DG35EC Technical Product Specification 1.13.1.2 ENERGY STAR* In 2007, the US Department of Energy and the US Environmental Protection Agency revised the ENERGY STAR* requirements. Intel has worked directly with these two governmental agencies to define the new requirements. Currently this Intel® Desktop Board meets the Cat B requirements. For information about ENERGY STAR requirements and recommended configurations Refer to http://www.intel.com/go/energystar 1.13.1.3 Wake-up Devices and Events Table 8 lists the devices or specific events that can wake the computer from specific states. Table 8. Wake-up Devices and Events These devices/events can wake up the computer... LAN PME# signal ...from this state S1, S3, S4, S5 (Note) S1, S3, S4, S5 (Note) Power switch PS/2 devices RTC alarm Serial port S1, S3, S4, S5 S1, S3 S3, S4, S5 S3 USB S3 WAKE# signal S1, S3, S4, S5 Note: For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option to Power On will enable a wake-up event from LAN in the S5 state. NOTE The use of these wake-up events from an ACPI state requires an operating system that provides full ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake events. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

Intel Desktop Board DG35EC Technical Product Specification
32
1.13.1.2
ENERGY STAR
*
In 2007, the US Department of Energy and the US Environmental Protection Agency
revised the ENERGY STAR* requirements.
Intel has worked directly with these two
governmental agencies to define the new requirements.
Currently this Intel
®
Desktop
Board meets the Cat B requirements.
For information about
Refer to
ENERGY STAR requirements and recommended configurations
1.13.1.3
Wake-up Devices and Events
Table 8 lists the devices or specific events that can wake the computer from specific
states.
Table 8. Wake-up Devices and Events
These devices/events can wake up the computer…
…from this state
LAN
S1, S3, S4, S5
(Note)
PME# signal
S1, S3, S4, S5
(Note)
Power switch
S1, S3, S4, S5
PS/2 devices
S1, S3
RTC alarm
S3, S4, S5
Serial port
S3
USB
S3
WAKE# signal
S1, S3, S4, S5
Note: For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program.
Setting this option to
Power On will enable a wake-up event from LAN in the S5 state.
±
NOTE
The use of these wake-up events from an ACPI state requires an operating system
that provides full ACPI support.
In addition, software, drivers, and peripherals must
fully support ACPI wake events.