Intel DH55TC Product Guide - Page 42

Removing a PCI Express x16 Graphics Card, - front panel connections

Get Intel DH55TC PDF manuals and user guides View all Intel DH55TC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Intel Desktop Board DH55TC Product Guide 4. Connect a monitor to the graphics card according to the manufacturer's instructions. Figure 19. Installing a PCI Express x16 Graphics Card Removing a PCI Express x16 Graphics Card Follow these instructions to remove a PCI Express x16 graphics card from a connector: 1. Observe the precautions in "Before You Begin" on page 27. 2. Disconnect the monitor cable from the graphics card back panel connector. 3. Remove the screw (Figure 20, A) that secures the card's metal bracket to the chassis back panel. 4. Push the card ejector lever down using the tip of a pencil or similar tool (Figure 20, B) in the notch. This will release the card from the connector (C). 5. Pull the card straight up to remove it. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Intel Desktop Board DH55TC Product Guide
42
4.
Connect a monitor to the graphics card according to the manufacturer’s
instructions.
Figure 19.
Installing a PCI Express x16 Graphics Card
Removing a PCI Express x16 Graphics Card
Follow these instructions to remove a PCI Express x16 graphics card from a connector:
1.
Observe the precautions in "Before You Begin" on page 27.
2.
Disconnect the monitor cable from the graphics card back panel connector.
3.
Remove the screw (Figure 20, A) that secures the card’s metal bracket to the
chassis back panel.
4.
Push the card ejector lever down using the tip of a pencil or similar tool
(Figure 20, B) in the notch.
This will release the card from the connector (C).
5.
Pull the card straight up to remove it.