Intel DH61AG English Product Guide - Page 39

Connecting to a Power Supply - power plug

Get Intel DH61AG PDF manuals and user guides View all Intel DH61AG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Installing and Replacing Desktop Board Components Connecting to a Power Supply The board can use the following power supplies: • External Power Supply - the board can be powered with a 19 VDC external power supply though the 19 VDC connector (Figure 18, A) on the back panel. The back panel connector accepts plugs with an inner diameter (ID) of 5.1 mm and an outer diameter (OD) of 7.4 mm, where the inner contact is 19 (±5%) VDC and the shell is GND. • Internal Power Supply - the board can alternatively be powered via the onboard 19 VDC 1 x 2 power connector (Figure 18, B). The signal names for the onboard power connector are shown in Table 14. Use of an external 19 VDC power supply is preferred. Total power consumption will depend on the system configuration selected by the integrator. Refer to Section 2.5.1, Power Supply Considerations, of the Intel Desktop Board DH61AG Technical Product Specification for further guidance. Figure 18. Power Supply Connections Table 14. 19 VDC Power Connector Pin Signal Name 1 Ground 2 +19 VDC 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Installing and Replacing Desktop Board Components
39
Connecting to a Power Supply
The board can use the following power supplies:
•
External Power Supply
– the board can be powered with a 19 VDC external
power supply though the 19 VDC connector (Figure 18, A) on the back panel.
The
back panel connector accepts plugs with an inner diameter (ID) of 5.1 mm and an
outer diameter (OD) of 7.4 mm, where the inner contact is 19 (±5%) VDC and the
shell is GND.
•
Internal Power Supply
– the board can alternatively be powered via the onboard
19 VDC 1 x 2 power connector (Figure 18, B).
The signal names for the onboard
power connector are shown in Table 14.
Use of an external 19 VDC power supply is preferred.
Total power consumption will
depend on the system configuration selected by the integrator.
Refer to Section 2.5.1,
Power Supply Considerations, of the
Intel Desktop Board DH61AG
Technical Product
Specification
for further guidance.
Figure 18.
Power Supply Connections
Table 14. 19 VDC Power Connector
Pin
Signal Name
1
Ground
2
+19 VDC