Intel DH87RL Technical product specification - Page 61
Overview of BIOS Features - cpu support
View all Intel DH87RL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3 Overview of BIOS Features 3.1 Introduction The board uses an Intel Visual BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the Visual BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as RLH8710H.86A. When the BIOS Setup configuration jumper is set to configure mode and the computer is powered-up, the BIOS compares the CPU version and the microcode version in the BIOS and reports if the two match. The BIOS Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing the key after the POST memory test begins and before the operating system boot begins. Figure 17. Intel Visual BIOS Screen 61