Intel E1400 Design Guidelines - Page 100
Applying Flux to the Thermocouple Bead, Cutting Solder
UPC - 683728187330
View all Intel E1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Case Temperature Reference Metrology Figure 7-24. Applying Flux to the Thermocouple Bead 21. Cut two small pieces of solder 1/16 inch (0.065 inch / 1.5 mm) from the roll using tweezers to hold the solder while cutting with a fine blade(see Figure 7-25) Figure 7-25. Cutting Solder 22. Place the two pieces of solder in parallel, directly over the thermocouple bead (see Figure 7-26) 100 Thermal and Mechanical Design Guidelines
Case Temperature Reference Metrology
100
Thermal and Mechanical Design Guidelines
Figure 7-24. Applying Flux to the Thermocouple Bead
21. Cut two small pieces of solder 1/16 inch (0.065 inch / 1.5 mm) from the roll using
tweezers to hold the solder while cutting with a fine blade(see Figure 7-25)
Figure 7-25. Cutting Solder
22. Place the two pieces of solder in parallel, directly over the thermocouple bead (see
Figure 7-26)