Intel S5000VSASATAR User Guide - Page 36
Clearing the CMOS - ram
View all Intel S5000VSASATAR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Clearing the CMOS If you are not able to access the BIOS setup screens, the CMOS Clear jumper will need to be used to reset the configuration RAM. 1. Power down the system and disconnect the AC power. 2. Open the server. 3. Move the jumper (J1J1) from the normal operation position, CMOS Clear by BMC, at pins 1 and 2 to the CMOS Clear Force Erase position, covering pins 2 and 3 as indicated in the following diagram. CMOS CLR PASSWORD CLR Default Default 2 CLEAR 2 CLEAR 3 CMOS 3 PASSWORD J1J1 J1J2 Figure 6. CMOS Clear Jumper AF000187 4. Reconnect the AC power, power up the system. 5. When the system begins beeping, power it down and disconnect the AC power. 6. Return the CMOS Clear jumper to the CMOS Clear by BMC location, covering pins 1 and 2. 7. Close the server chassis. 8. Reconnect the AC power and power up the system. 18 Intel® Server Board S5000VSA User's Guide