Invacare 4V88FFR Owners Manual - Page 25
Using the Flip-Back Armrest
View all Invacare 4V88FFR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Invacare ® Veranda™ 3000/4000 1. While supporting the elevating legrest A with one hand, rotate angle adjustment knob B counter clockwise with other hand. 2. Pull the adjustment knob up, then lift or lower elevating legrest to one of ten preset angle positions C. 3. Lower and tighten the adjustment knob to lock the elevating legrest in the desired angle. A C B 3. To use the swing-back arm, push the swing-back arm towards the front of the wheelchair and then downward into the arm socket. 4. Push the front of the swing-back arm into the arm socket until the armrest release button locks into the arm socket. A B C 4.4 Using the Flip-Back Armrest WARNING! - DO NOT operate or replace flip-back armrest when wheelchair is folded - otherwise injury or damage may result. - Ensure armrest is securely locked into arm socket and armrest release button locks into place before using. 1. Unlock the flip-back armrests by pressing and holding down the armrest release button A at the front of the armrest. 2. Pull the front of the swing-back arm B straight up/out of the arm socket C and towards the rear of the wheelchair. 24 1567855-C