Invacare 4V88FFR Owners Manual - Page 30
Replacing the Flip-Back Armrest, Installing/Removing/Adjusting the Back, Canes
View all Invacare 4V88FFR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
5.3 Replacing the Flip-Back Armrest 1. Unlock the flip-back armrests by pressing and holding down the armrest release button A at the front of the armrest. 2. Pull the front of the swing-back arm B straight up/out of the arm socket C and towards the rear of the wheelchair. 3. Remove the hex head screw D two coved washers E and locknut F securing the existing armrest G to the wheelchair frame H (Detail "A"). 4. Remove the existing armrest from frame. 5. Inspect rear tube of new armrest to ensure insert is properly installed with mounting holes aligned. 6. If not properly aligned, rotate the insert using a flat screwdriver to align the mounting holes. 7. Using the hex screw, spacer and locknut, secure the EXISTING armrest and insert to the wheelchair frame. Securely tighten the hex screw and locknut. Service A B C Detail "A" G F D E H 5.4 Installing/Removing/Adjusting the Back Canes REMOVING THE BACK CANES - Reverse this procedure. ADJUSTING THE BACK CANE HEIGHT (VERANDA 4000 ONLY)- Remove the threaded handle and hex screw securing the back cane to the wheelchair frame before performing STEP 1. 1567855-C 29