Invacare 5490IVC Owners Manual - Page 23

Installing the Casters

Get Invacare 5490IVC PDF manuals and user guides View all Invacare 5490IVC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

4.7 Installing the Casters If low bed ends were ordered, proceed to 4.9 Installing Low Bed Ends, page 25, instead of performing this procedure. WARNING! Risk of Injury or Damage To avoid damage or personal injury from instability: - Ensure that the locking casters are installed diagonally from each other and are locked. ALWAYS locate locking casters in the same location on each bed end so that they will always be assembled diagonally opposite each other when inventory is mixed. If two locking casters are not included with the bed, contact a qualified dealer. Set-up 1. To install casters A, lay the bed ends B flat on the floor. 2. Insert the shaft of caster assembly C into the caster socket D. 3. To prevent excess movement of the bed during assembly, lock each of the two locking casters by pushing down on the caster lock. E Locking the casters may not prevent the bed from moving on slick or slippery surfaces. 4. To unlock each of the two locking casters, pull up on the caster lock F. 1114836-H-05 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Set-up
4.7
Installing the Casters
If low bed ends were ordered, proceed to 4.9 Installing Low
Bed Ends, page 25, instead of performing this procedure.
WARNING!
Risk of Injury or Damage
To avoid damage or personal injury from
instability:
– Ensure that the locking casters are installed
diagonally from each other and are locked.
ALWAYS locate locking casters in the same location
on each bed end so that they will always be
assembled diagonally opposite each other when
inventory is mixed.
If two locking casters are not included with the bed,
contact a qualified dealer.
1.
To install casters
A
, lay the bed ends
B
flat on the floor.
2.
Insert the shaft of caster assembly
C
into the caster
socket
D
.
3.
To prevent excess movement of the bed during
assembly, lock each of the two locking casters by
pushing down on the caster lock.
E
Locking the casters may not prevent the bed
from moving on slick or slippery surfaces.
4.
To unlock each of the two locking casters, pull up on
the caster lock
F
.
1114836-H-05
23