Invacare 5490IVC Owners Manual - Page 29

Installing/Removing Cable Lock, Installing, Removing, Installing the Manual Crank for Hi/Lo Function

Get Invacare 5490IVC PDF manuals and user guides View all Invacare 5490IVC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

4.11.1 Installing/Removing Cable Lock The following should be performed by a qualified technician only. Set-up 4.11.2 Installing the Manual Crank for Hi/Lo Function Installing 1. With the cables seated to the proper connector on control box, slide the cables E into the appropriate cable lock slots A. 2. Depress the cable lock clips B. 3. Push the cable lock clips into the locking slots C on the junction box D, until they click in place. Removing 1. Compress the cable lock clips B firmly. 2. Carefully pull the cable lock F away from the junction box D. 3. Slide the cable lock F off of the cables E. 1. Pinch the ears A on the input drive shaft cover B to open the cover. 2. Flip the input drive shaft cover up and push until it attaches to the gear box C. The cross pins D will now be accessible. 3. Connect the manual crank E to the cross pins until the spring F engages the cross pins. 4. Unfold the handle G on the hand crank. 1114836-H-05 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Set-up
4.11.1
Installing/Removing Cable Lock
The following should be performed by a qualified
technician only.
Installing
1.
With the cables seated to the proper connector on
control box, slide the cables
E
into the appropriate
cable lock slots
A
.
2.
Depress the cable lock clips
B
.
3.
Push the cable lock clips into the locking slots
C
on the
junction box
D
, until they click in place.
Removing
1.
Compress the cable lock clips
B
firmly.
2.
Carefully pull the cable lock
F
away from the junction
box
D
.
3.
Slide the cable lock
F
off of the cables
E
.
4.11.2
Installing the Manual Crank for Hi/Lo Function
1.
Pinch the ears
A
on the input drive shaft cover
B
to
open the cover.
2.
Flip the input drive shaft cover up and push until it
attaches to the gear box
C
. The cross pins
D
will now
be accessible.
3.
Connect the manual crank
E
to the cross pins until the
spring
F
engages the cross pins.
4.
Unfold the handle
G
on the hand crank.
1114836-H-05
29