Invacare 9153637784 Owners Manual - Page 49
Front Casters
View all Invacare 9153637784 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
9 Front Casters 9 FRONT CASTERS ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. 9.1 Installing/Replacing Front Casters/Forks ƽ WARNING Make sure both fork/caster assemblies are the same size before using the wheelchair, otherwise injury may occur. This procedure can be performed if replacing the exact same size front caster. 1. Remove the dust cover. 2. Remove the locknut and nylon washer that secures the fork to the caster headtube. 3. Drop the fork assembly out of the caster headtube. If caster tire/tube replacement is desired, refer to Replacing Front Casters on page 50. 4. Slide the new fork assembly into the caster headtube. 5. Reassemble by reversing STEPS 1-3. 6. Repeat STEPS 1-6 for the opposite fork assembly. 7. Adjust the forks. Refer to Adjusting Forks on page 50. Dust Cover Locknut Nylon Washer Caster Headtube Fork Assembly FIGURE 1 Installing/Replacing Front Casters/Forks Part No 1110546 49 Invacare® Tracer™ EX2 Wheelchair