Invacare 9153637784 Owners Manual - Page 54

10 ANTI-TIPPERS/WHEEL LOCKS 10.2 Using/Adjusting Patient Operated Wheel Locks Using Patient Operated Wheel Locks ƽ  WARNING DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are not brakes. If the wheelchair is equipped with push to lock wheel locks, elevating legrests, and wheel lock extension handles, the wheel lock extension handles MUST be removed before swinging the elevating legrests to the side, otherwise injury or damage may result. Interference between the top of the elevating legrest and the wheel lock extension handle may cause the wheel lock to disengage. Position wheelchair on a flat, level surface to perform this procedure. Ensure the wheelchair is not moving before engaging the wheel locks. 1. See Detail "A" for instructions on Push-to-Lock. Refer to Detail "B" for instructions on Pull-to-Lock. 2. Disengage the wheel locks by reversing the directions in STEP 1. Pull wheel lock handle toward the tire to disengage wheel lock Detail "A" Push-To-Lock Unlocked Position Locked Position Push wheel lock handle forward away from the tire to engage wheel lock Wheel Lock Pull wheel lock handle backward toward the tire to engage wheel lock Push wheel lock handle away from the tire to disengage wheel lock Unlocked Position Locked Position Wheel Lock Detail "B" - Pull-To-Lock FIGURE 4 Using Patient Operated Wheel Locks Invacare® Tracer™ EX2 Wheelchair 54 Part No 1110546