Invacare 9805 Owners Manual - Page 42

Wear and Damage, Cleaning, CARE AND MAINTENANCE

Get Invacare 9805 PDF manuals and user guides View all Invacare 9805 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

SECTION 11-CARE AND MAINTENANCE Lubricate all pivot points. Wipe all excess lubricant from lift surface. 1. Swivel Bar at Mounting Bracket 2. Boom Mounting Bracket 3. Boom to Mast Mount 4. Mast Mounting Bracket 5. Base to Mast Mount 6. Rear Casters 7. Front Casters Wear and Damage It is important to inspect all stressed parts, such as slings, spreader bar and any pivot for slings for signs of cracking, fraying, deformation or deterioration. Replace any defective parts IMMEDIATELY and ensure that the lift is not used until repairs are made. All sling metal parts should be inspected every three months, and if wear is apparent, replacement must be made. Check that all labels are present and legible. Replace if necessary. Cleaning The sling should be washed regularly in hot water (maximum temperature of 180°F (82°C)) and a biological solution. A soft cloth, dampened with water and a small amount of mild detergent, is all that is needed to clean the patient lift. The lift can be cleaned with non-abrasive cleaners. Auto wax or furniture polish will help maintain the sparkling finish over a long period of time. Ensure that casters are free of debris. Portable Patient Lift and Sling 42 Part No 1024492

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
SECTION 11—CARE AND MAINTENANCE
Portable Patient Lift and Sling
42
Part No 1024492
Lubricate all pivot points. Wipe all excess lubricant from lift surface.
1.
Swivel Bar at Mounting Bracket
2.
Boom Mounting Bracket
3.
Boom to Mast Mount
4.
Mast Mounting Bracket
5.
Base to Mast Mount
6.
Rear Casters
7.
Front Casters
Wear and Damage
It is important to inspect all stressed parts, such as slings, spreader bar and any pivot for
slings for signs of cracking, fraying, deformation or deterioration. Replace any defective
parts IMMEDIATELY and ensure that the lift is not used until repairs are made.
All sling metal parts should be inspected every three months, and if wear is apparent,
replacement must be made.
Check that all labels are present and legible. Replace if necessary.
Cleaning
The sling should be washed regularly in hot water (maximum temperature of 180°F
(82°C)) and a biological solution. A soft cloth, dampened with water and a small amount
of mild detergent, is all that is needed to clean the patient lift.
The lift can be cleaned with
non-abrasive cleaners. Auto wax or furniture polish will help maintain the sparkling
finish over a long period of time.
Ensure that casters are free of debris.