Invacare G5510 Owners Manual - Page 64
Reinstall Drive Shaft. Refer
View all Invacare G5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
7 TROUBLESHOOTING/MAINTENANCE - USER/DEALER SYMPTOM PROBABLE CAUSE USER SOLUTIONS DEALER SOLUTIONS • Bed sections do not move. • Pull tube. • Check pull tube(s) for binding. Call dealer for repairs. • Ensure pull tubes are properly connected. Refer to Adjusting and Reconnecting the Head Section Pull Tube on page 47. • Bed ends move in opposite directions. • Drive Shaft connected to wrong gear box shaft. • Call dealer. • Reinstall Drive Shaft. Refer to Assembling the Drive Shaft on page 51. • Hi/Lo function does not work. • Drive Shaft disconnected. • Call dealer. • Reinstall Drive Shaft. Refer to Assembling the Drive Shaft on page 51. • Pressing function on pendant • Motor cable connections are • Call dealer. results in motion other than that incorrect. intended. • Verify Connections. Refer to Inspecting the Bed on page 54. For access to part numbers, see online parts book at www.invacare.com or call Invacare. Part No 1180159-E 63 Invacare® G5510 Bed