Invacare V20RLR Owners Manual - Page 35
Rear Wheels
View all Invacare V20RLR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
10 Rear Wheels 10 REAR WHEELS ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or damage may occur. Removing/Installing Rear Wheels ƽ WARNING Only a qualified technician may change the size of the rear wheel or the seat-to-floor height. Make sure both rear wheels are the same size and are installed into the same respective mounting hole before using the wheelchair. Otherwise, injury may occur. 1. Remove the dust cap, hex screw, spacer and locknut that secure the rear wheel to the wheelchair frame. 2. Repeat STEP 1 for the opposite rear wheel. 3. To reinstall the rear wheel(s) onto the wheelchair, reverse STEPS 1-2. 4. Torque the locknut to 40 ft-lbs. 5. Adjust the wheel locks. Refer to Adjusting the Anti-Tippers. on page 39. Rear Wheel Dust Cap Axle Mounting Hole Locknut Spacer Wheelchair Frame Part No. 1148116 Hex Screw FIGURE 1 Removing/Installing Rear Wheels 35 Invacare® Veranda™Wheelchair