JVC DLA-NX9 Operation Manual 1
JVC DLA-NX9 Manual
 |
View all JVC DLA-NX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC DLA-NX9 manual content summary:
- JVC DLA-NX9 | Operation Manual 1 - Page 1
. . .. Getting Started D-ILA PROJECTOR DLA-NX9 DLA-NX7 DLA-NX5 INSTRUCTIONS Set up Operate Adjust/Set Maintenance Troubleshooting Mobile User Guide http://manual3.jvckenwood.com/projector/mobile/global/ The Mobile User Guide can be viewed on mobile internet devices including smartphones and - JVC DLA-NX9 | Operation Manual 1 - Page 2
do not remove cover. Refer servicing to qualified service personnel. This projector is equipped with a 3-blade in accordance with the instructions, may cause harmful Number: DLA-NX9BK, DLA-NX7BK, DLA-NX5BK Trade Name: JVC Responsible party the projector in a place that cannot support its - JVC DLA-NX9 | Operation Manual 1 - Page 3
instructions should be adhered to. - All operating instructions should be followed. - Place the projector the operating instructions. Adjust only those controls that are covered by the Operation Manual, as completion of any service or repairs to this product, ask the service technician to perform - JVC DLA-NX9 | Operation Manual 1 - Page 4
your dealer, or the nearest authorized JVC service center. - When fixing the it might stick to the picture element. There is no problem with the playback of moving images, e.g. normal video may pose an eye hazard. - When turning on the projector, ensure that no one is looking into the projection - JVC DLA-NX9 | Operation Manual 1 - Page 5
to ensure Safety and EMC. Ensure that the power cable used for the projector is the correct type for the AC outlet in your country. Consult your electromagnetic compatibility and electrical safety. European representative of JVC KENWOOD Corporation is: JVCKENWOOD Deutschland GmbH Konrad-Adenauer - JVC DLA-NX9 | Operation Manual 1 - Page 6
Getting Started ENGLISH Information for Users on Disposal of Old Equipment and Batteries [European Union only] These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the - JVC DLA-NX9 | Operation Manual 1 - Page 7
Getting Started IEC62471-5 Location information of the mark As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015 7 - JVC DLA-NX9 | Operation Manual 1 - Page 8
that is supported by DLA-NX9. l indicates a function that is supported by DLA-NX7. m indicates a function that is supported by DLA-NX5. Items not marked with any of the above symbols are supported by all models. The illustrations of the projector unit used in this manual are those of DLA-NX9. The - JVC DLA-NX9 | Operation Manual 1 - Page 9
USA) (about. 2 m (about. 78.7 in 1 piece 0 Quick User Guide, safety precautions, warranty card, and other printed material are also included. 0 Be sure to read the "Safety Precautions" before using this projector. Optional Accessories 0 Replacement lamp: Product no. PK-L2618UW 0 3D - JVC DLA-NX9 | Operation Manual 1 - Page 10
Warm air is discharged to cool down the internal temperature. Do not block the vents. Main Unit - Bottom E Feet The height and angle of the projector can be adjusted by turning the foot. (0 to 5 mm (0 to 0.2 in)) (P. 18) When the foot is removed, it can be used as the mounting hole - JVC DLA-NX9 | Operation Manual 1 - Page 11
Getting Started Main Unit - Side F Lamp Cover When replacing the light source lamp, remove this cover. (P. 67) F Main Unit - Rear G K H I K J KL G Input terminals J Power input terminal In addition to the video input terminal, there are also other connection terminals for devices such as - JVC DLA-NX9 | Operation Manual 1 - Page 12
connecting to devices that support HDMI output. (P. 19) It is fitted to the M3 lock hole. The depth of the screw hole is 3 mm (0.1 in). D [RS-232C] terminal (D-sub 9-pin male) The projector can be controlled by connecting a PC to this terminal. E [SERVICE] terminal For updating the software using - JVC DLA-NX9 | Operation Manual 1 - Page 13
Getting Started Remote Control A B [STANDBY] Turns off the power. (P. 23) B C [ON] Turns on the power. (P. 22) A B C [INPUT] C Switches the input to [HDMI 1] or D E [HDMI 2]. (P. 22) D [SETTING MEMORY] F G Displays the installation mode selection menu. H E [LENS CONTROL] I For - JVC DLA-NX9 | Operation Manual 1 - Page 14
can cause battery leakage. 0 Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 0 If you want to dispose of the battery, please consider the collection systems or facilities for appropriate recycling. Effective Range of Remote - JVC DLA-NX9 | Operation Manual 1 - Page 15
Getting Started Menu AB CDEF Select the icon at the top of the menu to display its corresponding setting item as shown below. A Picture Adjust B Input Signal C Installation D Display Setup E Function F Information 15 - JVC DLA-NX9 | Operation Manual 1 - Page 16
cause interference patterns to occur. 0 In this case, you can change the size of the screen to make the interference patterns less noticeable. Using the projector at a high altitude When using this unit at a location that is higher than 900 m (3,000 ft) above sea level (low air pressure), set the - JVC DLA-NX9 | Operation Manual 1 - Page 17
an earthquake. 0 Regardless of the warranty period, JVC is not liable for any product damage caused by mounting the unit with non-JVC ceiling fittings or to an environment that is not height to shut down the projector. If you need information, please consult your authorized dealer or specialist. 17 - JVC DLA-NX9 | Operation Manual 1 - Page 18
Adjusting the Position Adjusting the elevation angle of the projector The height and inclination of the unit (0 to 5 mm (0 to 0.2 in)) can be adjusted by also changes with the amount of vertical shift. 0 The values on the graph are intended as a guide. Use them for reference during installation. 18 - JVC DLA-NX9 | Operation Manual 1 - Page 19
For details, please refer to the instruction manual of the device to be connected. 0 This projector is used for projecting images. To Please use a certified Premium High Speed HDMI Cable (18 Gbps compatible) when inputting 4K video signals from an external device. 0 Also, please refer to "HDMI 2 EDID - JVC DLA-NX9 | Operation Manual 1 - Page 20
Connecting via HDMI-DVI conversion cable This Unit Desktop PC, etc. Set up To [HDMI 1] or [HDMI 2] input terminal HDMI-DVI Conversion Cable (Sold Separately) DVI O utput Terminal 0 If noise occurs, move the desktop PC away from this unit. 0 If the video is not displayed, try to reduce the - JVC DLA-NX9 | Operation Manual 1 - Page 21
and electric shock 0 The power consumption of this unit is large. Please connect it directly to the wall outlet. 0 When you are not using the projector, please unplug the power cord from the outlet. 0 Connect it using only the power cord supplied. 0 Do not use a voltage other than the indicated - JVC DLA-NX9 | Operation Manual 1 - Page 22
off When in "ECO Mode" WARNING LIGHT STANDBY/ON WARNING LIGHT STANDBY/ON WARNING LIGHT STANDBY/ON 2 Choose the image to project Remote control/projector unit: press the [INPUT] button to switch the input 0 Play back the selected device to project the image. To hide the image temporarily - JVC DLA-NX9 | Operation Manual 1 - Page 23
3 Turn off the power Remote control: press the B [STANDBY] button Projector unit: press the A button 0 While the "Are you sure you want to turn off?" message is displayed, press the button again. 0 The lamp turns off, - JVC DLA-NX9 | Operation Manual 1 - Page 24
Operate Adjusting the Projector Screen Adjusting the Lens According to the Projection Position Press the [LENS CONTROL] button, and use the [JKH I] 1 keys to adjust Focus, Zoom (screen size), - JVC DLA-NX9 | Operation Manual 1 - Page 25
Screen No. Off 0 1 8 MEMO 0 You can utilize the optional optical sensor and dedicated projector calibration software to make finer adjustments. For details on the dedicated projector calibration software, please visit our website. http://www3.jvckenwood.com/english/download/ 0 This item is not - JVC DLA-NX9 | Operation Manual 1 - Page 26
Operate Adjusting the Screen Size (Aspect) The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that has been input. 1 Press the [MENU] button to display the menu 2 Select "Installation" " "Aspect" in the menu, then select the setting and - JVC DLA-NX9 | Operation Manual 1 - Page 27
the 3D Synchro Emitter such that the 3D Glasses can receive the signal from the 3D Synchro Emitter. For more details, please refer to the instruction manual of PK-EM1. 27 - JVC DLA-NX9 | Operation Manual 1 - Page 28
play back the 3D video image 0 For details on how to play back 3D video images, please refer to the instruction manual of the player or recorder in use. 0 This unit supports the following 3D formats. - Frame packing - Side-by-side - Top-and-bottom Setting the 3D format A Select "Input Signal" " "3D - JVC DLA-NX9 | Operation Manual 1 - Page 29
mode is suited for viewing HDR10 content such as Ultra HD Blu-ray and streaming service. Frame Adapt HDR* Picture mode that analyzes and automatically adjusts the HDR Tone Mapping image quality data to be saved and retrieved. * Supports software version v3.10 and later versions. Adjust/Set 29 - JVC DLA-NX9 | Operation Manual 1 - Page 30
animation works. Ideal for animated works with bright colors. Original JVC cinema-specific color gamut that achieves a balance between increased brightness and using the projector calibration software. Use this option when the player display setting is configured to "High Luminance Projector". Use - JVC DLA-NX9 | Operation Manual 1 - Page 31
Custom4 Pana_PQ_HL* Pana_PQ_BL* Color Profile * Color profile for Panasonic UHD BD player only. For details on how to use these options, please refer to P. 35. Supports software version v2.00 and later versions. Adjust/Set 31 - JVC DLA-NX9 | Operation Manual 1 - Page 32
Adjusting to your Preferred Color (Color Management) Based on the setting of the selected "Color Profile", you can adjust each of the following colors according to your preference: Red, Yellow, Green, Cyan, Blue, and Magenta. 1 Press the [MENU] button to display the menu, followed by selecting " - JVC DLA-NX9 | Operation Manual 1 - Page 33
is employed by UHD-BD and video streaming services, and Hybrid Log-Gamma which is employed Æ "Original HDR Technology of JVC" (P. 33) Original HDR Technology of JVC This unit is equipped with they are not viewed in a picture mode that supports HDR. This unit automatically switches to the optimal - JVC DLA-NX9 | Operation Manual 1 - Page 34
PQ) On White Reset Manual HDR Gamma Adjustment In addition to the can also be performed manually on this unit. Fine of highlights. Æ "Using Tone Mapping for Manual Adjustments" (P. 44) Picture Tone 0 Dark the HDR image analysis technology of JVC, allowing users to enjoy high picture - JVC DLA-NX9 | Operation Manual 1 - Page 35
JVC projector display characteristics. * Supports firmware version v2.00 or later. Step 1: Using Panasonic DP-UB9000: Select "High Luminance Projector" or "Basic Luminance Projector on the instructions above, and choose it in the JVC "HDR10 Auto Select" menu screen. ("HDR10 Auto Select"P. 55) - JVC DLA-NX9 | Operation Manual 1 - Page 36
Pixel Control) The new image-processing algorithm developed by JVC helps to create a natural impression that is sharper at when viewing normal Blu-ray contents, and to "High-res" such as when viewing 4K resolution contents. Enhance 0 to 10 Enhances the sharpness of the image. Smoothing 0 - JVC DLA-NX9 | Operation Manual 1 - Page 37
Fine-tuning the Image Quality Adjusting the Output Value of the Projected Image (Gamma) You can adjust the output value of the projected image with respect to the video signal input. * This item is not available when "Picture Mode" is set to "Frame Adapt HDR". Example of gamma adjustment The - JVC DLA-NX9 | Operation Manual 1 - Page 38
"Gamma" Gamma When "Color Profile" is Film 1 set to "Film 1"k l Film 2 When "Color Profile" is Film 1 set to "Film 2"k l Film 2 2.2 2.4 2.6 Cinema 1 Cinema 2 HDR(PQ) HDR(HLG) THX k Custom 1 to Custom 3 Description Image is close to the characteristics of Eastman Kodak Company movie films. Places - JVC DLA-NX9 | Operation Manual 1 - Page 39
Fine-tuning to the Preferred Gamma Setting You can perform fine adjustments based on the selected gamma adjustment setting. 1 Press the [GAMMA SETTINGS] button to display the gamma menu 0 You can also perform setting from "Picture Adjust"""Gamma" in the menu. 2 Adjust to the preferred setting 0 - JVC DLA-NX9 | Operation Manual 1 - Page 40
data created externally can be selected as the base setting value for adjustment. 0 The factory setting for "Import" is "2.2". 0 You can use the calibration software to customize the gamma data adjustment, and import the created gamma data. Please check with your authorized dealer for details. 40 - JVC DLA-NX9 | Operation Manual 1 - Page 41
with a standard level of brightness. High Suitable for contents that are generally dark. It is also an effective setting for larger screens. *1 Supports software version v3.10 and later versions. This picture mode is only effective for HDR10 contents. *2 "Picture Mode" is only effective for - JVC DLA-NX9 | Operation Manual 1 - Page 42
3 Configure to "HDR Processing" in the "Picture Adjust" menu. *3 "HDR Processing" This is a feature for configuring the method of content analysis. HDR Processing Effects on the Video Image Frame by Frame Automatically adjusts the HDR tone mapping after analyzing the peak brightness of each - JVC DLA-NX9 | Operation Manual 1 - Page 43
(software version v2.00 and later versions). To fine-tune the settings, configure "Auto Tone Mapping" to "Off" and set manually. Æ "Using Tone Mapping for Manual Adjustments" (P. 44) 3 Configure the base brightness in "Mapping Level" 0 The "Auto Tone Mapping" setting is configured based on a 100 - JVC DLA-NX9 | Operation Manual 1 - Page 44
Using Tone Mapping for Manual Adjustments "HDR(PQ)" gamma is the PQ curve adopted by HDR10. Fine adjustments can be made according to the screen size and environment although the default settings for viewing with the projector have been adjusted to allow optimum viewing. Default settings when - JVC DLA-NX9 | Operation Manual 1 - Page 45
have been adjusted to display the projector images on the screen in the optimal quality in the default setting based on the original PQ curve. For users who wish to obtain results more faithful to the original PQ curve, please adjust manually with reference to the values below. When clipping - JVC DLA-NX9 | Operation Manual 1 - Page 46
item cannot be set when "Low Latency" is set to "On". Motion Enhance You can reduce motion blur with this function enhancing the response of D-ILA image devices. If the image outline is unnatural, set this item to "Off". 1 Press the [MENU] button to display the menu and select "Picture Adjust - JVC DLA-NX9 | Operation Manual 1 - Page 47
Input Signal IInput Level ...P. 54 IColor Space ...P. 54 I3D Setting ...P. 27 IHDR Setting ...P. 55 9 HDR10 Auto Select ...P. 55 9 HLG Auto Select ...P. 55 IHDMI 2 EDID ...P. 55 * Supports software version v3.10 and later versions. 47 - JVC DLA-NX9 | Operation Manual 1 - Page 48
...P. 64 ILanguage ...P. 64 Function ITrigger ...P. 64 IOff Timer ...P. 64 IECO Mode ...P. 64 INetwork ...P. 65 IRemote Code ...P. 65 IHigh Altitude Mode ...P. 66 IFactory Reset ...P. 66 ISoftware Update ...P. 66 Information IInformation ...P. 66 * Software version v3.10 and later versions are not - JVC DLA-NX9 | Operation Manual 1 - Page 49
"High" setting may cause the lamp to darken faster. Aperture JVC has developed an image analysis algorithm, which analyzes the state of To perform adjustment manually, select "Manual". *2 When the setting is changed to Auto after performing manual adjustment, the value set manually will be used - JVC DLA-NX9 | Operation Manual 1 - Page 50
color emitted by a projector used for digital cinema Increasing the value enhances the blue tone of the video image, while decreasing the value enhances the red tone. Color temperature that gives priority to brightness. The color temperature of video images can be adjusted manually and saved as one - JVC DLA-NX9 | Operation Manual 1 - Page 51
2 Natural HDR10 HLG User 1 to User 6 Frame Adapt HDR* 5500K 6500K 7500K 9300K High Bright HDR10 HLG THX k Custom 1 to Custom 2 6500K * Supports software version v3.10 and later versions. Color Temp. Correction Value For setting the base color temperature for the adjustment of "Gain Red - JVC DLA-NX9 | Operation Manual 1 - Page 52
6500K 7500K 9300K Xenon 1 k l Xenon 2 k l High Bright Natural HDR10 HLG User 1 to User 6 Frame Adapt HDR* 5500K 6500K 7500K 9300K High Bright * Supports software version v3.10 and later versions. Correction Value Gamma You can adjust the output value of the projected image with respect to - JVC DLA-NX9 | Operation Manual 1 - Page 53
that this item be configured to "Standard" such as when viewing normal Blu-ray contents, and to "High-res" such as when viewing 4K resolution contents. 0 Setting values: Standard and High-res Enhance For adjusting the high-frequency areas. Increasing the value enhances the definition for a sharper - JVC DLA-NX9 | Operation Manual 1 - Page 54
Input Signal Input Level For setting the dynamic range (gradation) of the video input. If the image is not displayed properly even after selecting "Auto", select an appropriate setting. 0 If the dynamic range is not appropriate, the bright areas become overexposed, and the dark areas become - JVC DLA-NX9 | Operation Manual 1 - Page 55
"Picture Mode" to User 1 to User 6 when receiving HDR10 packets. Off "Picture Mode" does not switch automatically when receiving HDR10 packets. * Supports software version v3.10 and later versions. HLG Auto Select For configuring the automatic switching setting of "Picture Mode" when receiving - JVC DLA-NX9 | Operation Manual 1 - Page 56
". * The lens position may be shifted slightly with respect to the position that was saved. * Software version v3.10 and later versions do not support "Pincushion". Mode Select For selecting the group to save and retrieve the setting values. 0 Setting values: Mode 1 to Mode 10 * The name of the - JVC DLA-NX9 | Operation Manual 1 - Page 57
Lens Control Focus / Zoom / Shift For adjusting the lens according to the projection position Æ "Adjusting the Lens According to the Projection Position" (P. 24) Image Pattern For setting whether to display the lens adjustment pattern. Setting Off On Description Displays external signals, and - JVC DLA-NX9 | Operation Manual 1 - Page 58
Pixel Adjust For correcting the phase shifting between each RGB color by adjusting the pixel. Adjust For setting the adjustment feature to On or Off. Adjust Area Whole Zone Setting Description Adjusts the entire image. Enables fine adjustment of each area by dividing the screen evenly into 10 - JVC DLA-NX9 | Operation Manual 1 - Page 59
E After adjustment is complete, press the [BACK] button twice to exit the Adjustment mode Remote Control Operation Guide Button Name [PICTURE MODE] [C.M.D.] Function Adj.Col. Pixel/Fine [GAMMA SETTINGS] Pat.Col. [ADVANCED MENU] Adj.Area Description of Operation Changes "Adjust Color". Switches - JVC DLA-NX9 | Operation Manual 1 - Page 60
for Adjustment Adj.Col. Pixel/Fine Pat.Col. Adj.Area PICTURE MODE C.M.D. GAMMA ADVANCED SETTINGS MENU Back BACK Remote Control Operation Guide Adjustment Setting H 20ʢ20 / 20ʣ V 5ʢ 5 / 5ʣ Indicates the maximum and minimum misalignment value of the entire screen.(Max. / Min.) E After - JVC DLA-NX9 | Operation Manual 1 - Page 61
for Adjustment Adj.Col. Pixel/Fine Pat.Col. Adj.Area PICTURE MODE C.M.D. GAMMA ADVANCED SETTINGS MENU Back BACK Remote Control Operation Guide Cursor Position Position 8 / 5 H -31 V7 Adjustment Setting G After adjustment is complete, press the [BACK] button twice to exit the Adjustment - JVC DLA-NX9 | Operation Manual 1 - Page 62
image with it compressed in the horizontal direction only. * Supports software version v3.10 and later versions. Screen Adjust By selecting (R)" according to the installation status of the projector. 0 "Front" or "Ceiling Mount (F)" is set when projector is installed in the front with respect to - JVC DLA-NX9 | Operation Manual 1 - Page 63
curved screen. 0 Setting range: 0 to 16 * When using the projector with the lens shifted in the vertical direction, the amount of distortion at Set 0 16 * Software version v3.10 and later versions are not supported. Aspect The screen size of the projected image can be adjusted optimally according - JVC DLA-NX9 | Operation Manual 1 - Page 64
" or "Off". Setting Off On Description Not displayed. Displays the "D-ILA" logo for 5 seconds during startup. Language For setting the display language is the same as the number configured. Outputs control signals when the projector is powered on if the "Installation mode" has the same number as - JVC DLA-NX9 | Operation Manual 1 - Page 65
Set Control4 SDDP Description Obtains the IP address automatically from the DHCP server inside the connected network. For configuring the network settings manually. For configuring the IP address. For configuring the subnet mask. For configuring the default gateway. Displays the MAC address of the - JVC DLA-NX9 | Operation Manual 1 - Page 66
"On" or "Off". Set to "On" when using the projector at a location of low atmospheric pressure (higher than 900 m (3, in "Color Profile" " "Custom1 to Custom6". Software Update For performing a software update. For the latest information on the software, refer to the firmware version. Adjust/Set 66 - JVC DLA-NX9 | Operation Manual 1 - Page 67
not to injure yourself as the lamp may be broken. 0 When replacing the lamp of a projector suspended from the ceiling, work at height is required. This is a dangerous operation. Please consult our service center. 1 Remove the power plug from the outlet 2 Remove the lamp cover 0 Remove the screw - JVC DLA-NX9 | Operation Manual 1 - Page 68
lamp cover 0 Slide the lamp cover from below and ensure that the two tabs at the top of the cover are inserted into the projector unit. 8 Tighten the screw with a t screwdriver 0 After ensuring that the corner indicated by the circle is properly seated, tighten the screw with a t screwdriver. MEMO - JVC DLA-NX9 | Operation Manual 1 - Page 69
Lamp Reset" from the menu Trigger Off Off Timer Off ECO Mode Off Network Remote Code A High Altitude Mode Off Lamp Reset Factory Reset Software Update 3 On the "Reset Lamp Time?" screen, select "Yes" and press the [OK] button 0 The lamp time is reset to zero. Reset Lamp Time? Yes No - JVC DLA-NX9 | Operation Manual 1 - Page 70
to be replaced or if dirt has entered the unit, please consult the authorized dealer from which this unit is purchased or any nearby JVC servicing center. * Be sure to attach the filter. Using this unit without attaching the filter may cause unexpected malfunction. 0 Sponge filter Product no.: J3K - JVC DLA-NX9 | Operation Manual 1 - Page 71
the Standby mode, pull out the power plug, followed by inserting it again B Press the A button on the projector unit to turn on the power again When "High Altitude Mode" is set to "On", and "Lamp Power" is vacuum cleaner. the sponge filter? Refer to P. 64 P. 64 P. 11, 16 P. 70 Troubleshooting 71 - JVC DLA-NX9 | Operation Manual 1 - Page 72
4K instruction manual projector manual of the 3D Glasses and 3D Synchro Emitter. Position them at an appropriate distance. Is the 3D Glasses and 3D Synchro Emitter combination correct? Check the model name of 3D Glasses and 3D Synchro P. 9 Emitter, and use the correct combination. Troubleshooting - JVC DLA-NX9 | Operation Manual 1 - Page 73
when the input signal is P. 54 different from that in the projector setting. Set the "Color Space" for "Input Signal" correctly. Aperture" set to "Auto 1" or "Auto 2"? Set "Aperture" to "Manual" P. 49 Projected image is dark Check Is the lamp near exhaustion? Is P. 28 P. 62 Troubleshooting 73 - JVC DLA-NX9 | Operation Manual 1 - Page 74
projector. P. 16 When the surrounding temperature of the projector is high, the fan revolution speed increases to protect the projector malfunction. There are small black or colored dots on the screen The D-ILA device is manufactured using high-precision technologies, but there may be some ( - JVC DLA-NX9 | Operation Manual 1 - Page 75
is connected but there is no signal. Input the video signals. The video signal input is not supported Input video signals that can be used. on this unit. (P. 86) Indicates that the lamp 67, 69) button on the operation panel of the projector unit or the remote control. Troubleshooting 75 - JVC DLA-NX9 | Operation Manual 1 - Page 76
be controlled by connecting it to a PC through the computer network with a LAN cable for control commands to be sent to the projector. Æ "Network" (P. 65) 0 Please use it after you have gained proper understanding from professional books or consulting the system administrator. RS-232C Specifications - JVC DLA-NX9 | Operation Manual 1 - Page 77
Command Format The command between this unit and the computer consists of "Header", "Unit ID", "Command", "Data" and "End". 0 Header (1 byte), Unit ID (2 bytes), Command (2 bytes), Data (n bytes), End (1 byte) Header This binary code indicates the start of communication. Binary Code 21 3F 40 06 - JVC DLA-NX9 | Operation Manual 1 - Page 78
Remote Control Code Binary code is sent during communication. Remote Control Button Name STANDBY ON INPUT SETTING MEMORY LENS CONTROL HIDE INFO. J K I H Binary Code 37 33 30 36 37 33 30 35 37 33 30 38 37 33 44 34 37 33 33 30 37 33 31 44 37 33 37 34 37 33 30 31 37 33 30 32 37 33 33 34 37 33 33 36 - JVC DLA-NX9 | Operation Manual 1 - Page 79
Communications Example This section shows the communication examples of RS-232C. Operating command Type Connection check Power (On) Power (Off) Remote control (MENU) Command PC " This unit: 21 89 01 00 00 0A This unit " PC: 06 89 01 00 00 0A PC " This unit: 21 89 01 50 57 31 0A This unit " PC: - JVC DLA-NX9 | Operation Manual 1 - Page 80
ILA Projector Model Name DLA-NX9B, DLA-NX7B, DLA-NX5B Display Panel/Size D-ILA device *1, 2 0.69" 4K D-ILA Single, RJ45 jack, 10BASE-T/100BASE-TX Service Terminal SERVICE Single (USB Type A) *5 Power the HDCP specifications. *5 Exclusively for firmware update. *6 The power consumption of this - JVC DLA-NX9 | Operation Manual 1 - Page 81
. The THX 4K DISPLAY certification is "an indication of high definition and high resolution", which is granted to products that have cleared more than 400 image quality tests. ® This unit is isf-certified, so calibration can be performed by an isf-certified trainer. After calibration is performed - JVC DLA-NX9 | Operation Manual 1 - Page 82
Screen Size and Projection Distance k Screen Size Diagonal (Inch) 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 17:9 Screen Wide-end Tele-end 1.67 3.43 1.96 4.02 2.25 4.60 2.54 5.19 2.83 5.77 3.12 6.36 3.41 6.94 3.70 7.53 3.99 8. - JVC DLA-NX9 | Operation Manual 1 - Page 83
Screen Size Diagonal (Inch) 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 17:9 Screen Wide-end Tele-end 65.5 135.1 77.0 158.2 88.5 181.2 99.9 204.2 111.4 227.3 122.8 250.3 134.3 273.4 145.8 296.4 157.2 319.4 168.7 342.5 180.1 - JVC DLA-NX9 | Operation Manual 1 - Page 84
l / m Screen size Diagonal (Inch) 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 17:9 Screen Wide End Tele End 1.79 3.66 2.09 4.28 2.40 4.90 2.70 5.52 3.01 6.14 3.31 6.75 3.62 7.37 3.92 7.99 4.23 8.61 4.54 9.23 4.84 9.84 5.15 10.46 5.45 11.08 5.76 11.70 6.06 - JVC DLA-NX9 | Operation Manual 1 - Page 85
Screen Size Diagonal (Inch) 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 17:9 Screen Wide-end Tele-end 70.5 144.1 82.3 168.5 94.5 192.9 106.3 217.3 118.5 241.7 130.3 265.7 142.5 290.2 154.3 314.6 166.5 339.0 178.7 363.4 190.6 387.4 202.8 411.8 214.6 436.2 226 - JVC DLA-NX9 | Operation Manual 1 - Page 86
(2048×1080) 24/25/30/50/60 Hz 4K (3840x2160) 24/25/30/50*/60* Hz 4K (4096x2160) 24/25/30/50*/60* Hz 1080p 24 Hz * When the color space is RGB/YCbCr(4:4:4), only 8-bit input is supported. PC signal (HDMI) Designation Resolution fh [kHz] fv [Hz] dot CLK [MHz] problem in some cases. Others 86 - JVC DLA-NX9 | Operation Manual 1 - Page 87
solid. The indicator appears blinking. Operation mode display Displays using the different colors and solid/blinking light of the indicator on the projector unit. "STANDBY/ON" lights up (red) ɾIn standby state "STANDBY/ON" lights up (green) ɾDuring lamp startup All lights off ɾDuring projection - JVC DLA-NX9 | Operation Manual 1 - Page 88
indicator will light up or appear blinking according to the operation mode of the projector unit. (Please refer to ""Operation mode display"P. 87".) The Warning mode is repair at your authorized dealer or a nearby service center. (*) If the scheduled time for lamp replacement is exceeded, the indicator may - JVC DLA-NX9 | Operation Manual 1 - Page 89
Dimensions k Top Surface (Unit: mm (in)) Bottom Surface 337 (13-1/4) 290 (11-7/16) 518 (20-3/8) 145 (5-11/16) 6 9 (2-3/4) 2 3 (15/16) Front 500 (19-3/4) 41 (1-5/8) 37 (1-7/16) Rear Surface 98 (3-7/8) 243 (9-19/32) 98 (3-7/8) 107 (4-7/32) 234 (9-1/4) 104 (4-1/16) 3 3 (1-5/16) 2 0 (13/ - JVC DLA-NX9 | Operation Manual 1 - Page 90
l / m Top Surface Bottom Surface 337 (13-1/4) 290 (11-7/16) 495 (19-1/2) 122 (4-13/16) 4 6 (1-13/16) Front 500 (19-3/4) 41 (1-5/8) 37 (1-7/16) Rear Surface 98 (3-7/8) 243 (9-19/32) 98 (3-7/8) 107 (4-7/32) 234 (9-1/4) 104 (4-1/16) 3 3 (1-5/16) 2 0 (13/16) 71 (2-13/16) 329 (12-15/16) - JVC DLA-NX9 | Operation Manual 1 - Page 91
64 Optional Accessories 9 Original HDR Technology of JVC 33 P Partial Adjustment (Zone Adjust 58, Projector 17 Securing the Projector (Ceiling Mount 17 Shift 24 Signal Display 66 Soft Ver 66 Software Update 66 Specifications 80 Signal Display 63 T Tint 53 Trigger 64 Troubleshooting - JVC DLA-NX9 | Operation Manual 1 - Page 92
Types of Possible Input Signals 86 U User Name Edit 49 V Viewing 3D Movies 000 Viewing HDR Contents 33 Viewing Videos 22 W When the Following Messages Appear 75 Whole Adjust (Fine 58, 60 Whole Adjust (Pixel 58, 59 Z Zoom 24 Alphanumeric 3D Format 28 3D Glasses 9, 27 3D Setting 28 3D - JVC DLA-NX9 | Operation Manual 1 - Page 93
Others 93 - JVC DLA-NX9 | Operation Manual 1 - Page 94
1019KSH-SW-XX DLA-NX9 DLA-NX7 DLA-NX5 D-ILA PROJECTOR .. © 2019
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
 |
 |
D-ILA
PROJECTOR
DLA-NX9
DLA-NX7
DLA-NX5
The Mobile User Guide can be viewed on mobile internet devices including
smartphones and tablets.
Mobile User Guide
Pour utilisation par le client :
Entrerci-dessous le N°de série qui
est situé sous le boîtier. Garder
cetteinformation comme référence
pour le futur.
Instrucción para el cliente :
Introduzca a continuación el nº de
serie que aparece en la parte
inferior lateral de la caja. Conserve
esta información como referencia
para uso ulterior.
For Customer use :
Enter below the serial No. which is
located on the side of the cabinet.
Retain this information for future
reference.
DLA-NX9 K,
DLA-NX7 K,
DLA-NX5 K,
DLA-NX9 K,
DLA-NX7 K,
DLA-NX5 K,
DLA-NX9 K,
DLA-NX7 K,
DLA-NX5 K,
Model No.
Serial No.
N° de modèle
N° de série
Modelo Nº
Nº de serie
Not suitable for household room illumination.
INSTRUCTIONS
B5A-2809-31
Getting Started
Set up
Operate
Adjust/Set
Maintenance
Troubleshooting
Others