JVC DLA-NX9 Operation Manual 1 - Page 80

Specifications - dla nx9b

Page 80 highlights

Specifications Product Name D-ILA Projector Model Name DLA-NX9B, DLA-NX7B, DLA-NX5B Display Panel/Size D-ILA device *1, 2 0.69" 4K D-ILA (4096 x 2160 pixels) x 3 Projection Lens 2.0 x power zoom lens, motorized zoom and focus Light-source Lamp Screen Size 265 W ultra-high pressure mercury lamp [product no.: PK-L2618UW Average lifespan: 4500 hours ("Low" mode) Approx. 60" to 280" (Aspect ratio of 16:9) k Approx. 60" to 200" (Aspect ratio of 16:9) l m Brightness 2200 lm k, 1900 lm l, 1800 lm m Projection Distance Refer to P. 82. Input Compatibility Signal Refer to P. 86. Display Resolution 8192 x 4320 pixels k *3, 4096 x 2160 pixels l m Input Terminal HDMI Input Output Terminal Trigger Terminal Dual, HDMI 19-pin x 2 (HDCP 2.2-compatible) *4 Single, Ø 3.5 mm DC Power Jack (E) DC OUT 12 V, 0.1 A 3D synchro Dedicated terminal for 3D Synchro Emitter (single, mini-DIN 3-pin) Control Terminal RS-232C Terminal Single, D-sub 9-pin (male) (external control) LAN Terminal Single, RJ45 jack, 10BASE-T/100BASE-TX Service Terminal SERVICE Single (USB Type A) *5 Power Requirements AC 100 V to 240 V, 50 Hz/60 Hz Power Consumption 400 W (during networked standby: 1.5 W *6, during standby: 0.3 W *7) Operation Environment Temperature: 5°C to 35°C; humidity: 20% to 80%; storage temperature: -10°C to 60°C Installation Height Below 5,000 ft (1,524 m) Dimensions (Width x Height x Depth) 500 mm x 234 mm x 518 mm (19-3/4 in x 9-1/4 in x 20-3/8 in) (including feet) k 500 mm x 234 mm x 495 mm (19-3/4 in x 9-1/4 in x 19-1/2 in) (including feet) l m Mass 21.8 kg (48 lb) k, 19.8 kg (43.6 lb) l, 19.6 kg (43.2 lb) m Accessories Refer to P. 9. *1 D-ILA is the abbreviation for Direct Drive Image Light Amplifier. *2 D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%. Only 0.01% or less of the pixels are either missing or would remain permanently lit. *3 During 3D playback, the display resolution is 4096 x 2160 pixels. *4 HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input terminal may not be displayed in some cases due to changes in the HDCP specifications. *5 Exclusively for firmware update. *6 The power consumption of this product during networked standby when all wired network ports are connected is 1.5 W. *7 "During standby" refers to Eco Mode standby (P. 64). 0 Design and specifications are subject to change without prior notice. 0 Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. Images may differ from the actual product. Others 80

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

Specifications
Product Name
D-ILA Projector
Model Name
DLA-NX9B, DLA-NX7B, DLA-NX5B
Display Panel/Size
D-ILA device *1, 2
0.69” 4K D-ILA (4096 x 2160 pixels) x 3
Projection Lens
2.0 x power zoom lens, motorized zoom and focus
Light-source Lamp
265 W ultra-high pressure mercury lamp [product no.: PK-L2618UW
Average lifespan: 4500 hours (“Low” mode)
Screen Size
Approx. 60” to 280” (Aspect ratio of 16:9)
k
Approx. 60” to 200” (Aspect ratio of 16:9)
l
m
Brightness
2200 lm
k
, 1900 lm
l
, 1800 lm
m
Projection Distance
Refer to P. 82.
Input Compatibility Signal
Refer to P. 86.
Display Resolution
8192 x 4320 pixels
k
*3, 4096 x 2160 pixels
l
m
Input Terminal
HDMI Input
Dual, HDMI 19-pin x 2 (HDCP 2.2-compatible) *4
Output Terminal
Trigger Terminal
Single, Ø 3.5 mm DC Power Jack (
E
)
DC OUT 12 V, 0.1 A
3D synchro
Dedicated terminal for 3D Synchro Emitter (single, mini-DIN 3-pin)
Control Terminal
RS-232C Terminal
Single, D-sub 9-pin (male) (external control)
LAN Terminal
Single, RJ45 jack, 10BASE-T/100BASE-TX
Service Terminal
SERVICE Single (USB Type A) *5
Power Requirements
AC 100 V to 240 V, 50 Hz/60 Hz
Power Consumption
400 W (during networked standby: 1.5 W *6, during standby: 0.3 W *7)
Operation Environment
Temperature: 5°C to 35°C; humidity: 20% to 80%; storage
temperature: -10°C to 60°C
Installation Height
Below 5,000 ft (1,524 m)
Dimensions (Width x Height x Depth)
500 mm x 234 mm x 518 mm (19-3/4 in x 9-1/4 in x 20-3/8 in) (including
feet)
k
500 mm x 234 mm x 495 mm (19-3/4 in x 9-1/4 in x 19-1/2 in) (including
feet)
l
m
Mass
21.8 k
g
(48 lb)
k
, 19.8 k
g
(43.6 lb)
l
, 19.6 k
g
(43.2 lb)
m
Accessories
Refer to P. 9.
*1
D-ILA is the abbreviation for Direct Drive Image Light Amplifier.
*2
D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%.
Only 0.01% or less of the pixels are either missing or would remain permanently lit.
*3
During 3D playback, the display resolution is 4096 x 2160 pixels.
*4
HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input
terminal may not be displayed in some cases due to changes in the HDCP specifications.
*5
Exclusively for firmware update.
*6
The power consumption of this product during networked standby when all wired network ports are connected
is 1.5 W.
*7
“During standby” refers to Eco Mode standby (P. 64).
0
Design and specifications are subject to change without prior notice.
0
Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order
to aid comprehension. Images may differ from the actual product.
80
Others