JVC DT-N21H Instruction Manual - Page 12
UMD setup
View all JVC DT-N21H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
UMD Setting UMD control parameters (TSL UMD Protocol V3.1/4.0, provided by Television System LTD.) Item Exit RS485 Address Position Display Type Baud Rate Parity Serial Port Source ID To do Return Main Menu Address setting 1 to 126: Set a particular address Position setting Choose Display Type Baud Rate setting Parity setting Choose Serial Port Setting of "Source ID"*1 Setting value 1 to 126 TopaBottom Source IDaUMD 38400a9600a19200 EvenaNone RS485aRS232 *1 Setting of "Source ID" (1) Change the input to one that you want to assign a video source name for. (2) Select "Source ID" Each time you revolve the "MENU" button, the character changes as follows. Space 0~9 A~Z a~z (4) Press the "MENU" button to move the arrow to the next space TḤhḤeḤcḤhḤaḤrḤacters entered before moving the arrow are memorized. (5) Repeat steps (3) and (4) (8 characters at maximum). (6) Press MENU button to store the name. UMD setup (1) Connect the external control equipment with the monitor (2) Set "Display Type" to "UMD" (3) Set "Serial Port" to RS485 or RS232 according to the port type of external control equipment (4) Make sure the "address", "Baud Rate", "Parity" the same (5) Adjust the external control equipment and send UMD command, the UMD information will be display as the right photo. User can set the character and color of the UMD and the color of Tally1 and 2. Tally1 UMD Tally2 CAMERA 1 Marker Settings for marker functions Item Exit Marker To do Return Main Menu Display setting Setting value aOn Marker Select Safety Area Fit Marker*1 Center Marker Adjust the ratio of marker Safety Area setting Fit Marker setting Display setting a4:3a13:9a14:9a15:9a16:9a1.85:1a2.35:1 a80%a85%a90%a93%a95% aOn aOn Marker Color Marker Outside Marker color setting Marker Outside color setting WhiteaRedaGreenaBlueaBlackaGray aGrayaBlack of actual display screen. When "Fit Marker" is On, the size of safety area is benchmarked against the area inside the scales marker, accounting for 80% ~ 95% of the area inside the scales marker. Example: Safety Area Marker select Center Marker Marker Outside 12 Marker: 4:3 Safety Area: 85% Center Marker: On Marker: 4:3 Safety Area: 85% Fit Marker: On