JVC FS-G2 Instruction Manual - Page 24

Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service. Symptom Possible Cause Action Power does not come on. The power cord is not connected to an Insert the plug into the socket. AC outlet. No sound is heard. • Connections are incorrect or loose. • A pair of headphones is connected. • MP3 disc is recorded with "packet writing." • Check all connections and make corrections. (See pages 6 and 7.) • Unplug the headphones from the PHONES jack. • It cannot be played. Replace the disc. Hard to listen to broadcasts because of noise. • Antennas are disconnected. • The AM loop antenna is too close to the unit. • The FM antenna is not properly extended and positioned. • Reconnect the antenna correctly and securely. • Change the position and direction of the AM loop antenna. • Extend FM antenna and orient to the best reception position. The disc does not play. The disc is upside down. Put the disc in with the label side up. Specific files (tracks) on an MP3 disc are Files other than MP3 are included in the They cannot be played. not played. disc. Impossible to record. Small tabs on the back of the cassette are Cover the holes with adhesive tape. removed. Operations are disabled. The built-in microprocessor has Unplug the AC power cord then plug it malfunctioned due to external electrical back in. interference. Unable to operate the unit by the remote control. • The path between the remote control and the remote sensor on the unit is blocked. • The batteries are exhausted. • You are using the remote control too far from the unit. • Remove the obstruction. • Replace the batteries. (See page 6.) • Signals cannot reach the remote sensor. Move closer to the unit. 22