JVC FS-G2 Instruction Manual - Page 9

Do not connect the AC power cord until all other connections have been made. To connect AM and FM antennas 1 AM loop antenna (supplied) Connecting Other Equipment To connect audio equipment You can connect audio equipment-used only as a playback device. • DO NOT connect any equipment while the power is on. • DO NOT plug in any equipment until all connections are complete. ANTENNA AM LOOP ANTFEMNNA 2 FM antenna 1 Connect the supplied AM loop antenna to the AM LOOP terminal. Place the antenna away from the unit and adjust its position for the best reception. For playing other equipment through this unit, connect between the audio output jacks on the other equipment and AUX jacks by using audio cords with mini plugs (not supplied). To audio output AUX L R To Audio equipment To audio output 2 Adjust the position for the FM antenna for the best reception. For better reception of both FM and AM • Make sure the antenna conductors do not touch any other terminals or connecting cords. • Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord. When the audio equipment has pin jacks for audio output: Be sure that the pin plugs of the audio cords are colored- white plugs and jacks are for left audio signals, and red ones for right audio signals. NOW you are ready to plug in the unit. IMPORTANT: Be sure to check that all connections have been made before plugging in the power cord. 7