JVC FS-G5 Instruction Manual - Page 18

Changing the Display Brightness-DIMMER You can dim the display window. DIMMER DIMMER-1 DIMMER-2 DIM OFF (Canceled) DIMMER-1 DIMMER-2 Dims the display illumination. Erases the display illumination. If there is a power failure The clock loses the setting and is reset to "AM 12:00." You need to set the clock again. Turning Off the Power Automatically Remote ONLY To turn off the System after playback is over- Auto Standby A.STANDBY Setting the Clock Remote ONLY Without setting the built-in clock, you cannot use the Daily Timer (see page 18). • To exit from the clock setting, press CLOCK/TIMER as required. • To go back to the previous step, press CANCEL. 1 Activate the clock setting mode. REC CLOCK /TIMER • If you have already adjusted the clock before, press the button repeatedly until the clock setting mode (see page 18) is selected. 2 Adjust the hour. PRESET UP SET PRESET DOWN 3 Adjust the minute. PRESET UP SET PRESET DOWN When Auto Standby is in use, the A.STANDBY indicator lights on the display. REC A.STANDBY When the disc playback stops, the A.STANDBY indicator starts flashing. If no disc operation is done for about 3 minutes while the indicator is flashing, the System turns off (stands by) automatically. • Auto Standby only works after disc playback. To turn off the System after a certain period of time-Sleep Timer 1 Specify the time (in minutes). SLEEP 10 20 30 60 90 120 OFF (Canceled) 2 Wait until the set time goes off. To check the time remaining until the shut-off time SLEEP REC "CLOCK OK" appears and the built-in clock starts working. To check the current time during play DISPLAY Clock Source information SLEEP • If you press the button repeatedly, you can change the shutoff time. 14