JVC FS-H30 Instruction Manual - Page 20
Playing Back Tapes
View all JVC FS-H30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Playing Back Tapes You can play back type I tapes. Playing Back a Tape 1 Press ) for cassette deck on the unit. The cassette holder opens. If no cassette is inserted when you press 2 3 TAPE "NO TAPE" appears on the display. To stop playing, press 7. To fast-wind to the left or to the right, press ¢ or 4 while the tape is not running. The tape direction indicator (3 or 2) starts flashing rapidly on the display. 2 Put a cassette in with the exposed part of the tape down. To remove the cassette, press ) on the unit. To play both sides-Reverse Mode You can set the deck to play just one side of a tape, both sides once, or both sides continuously. On the remote control ONLY: Press REV.MODE (reverse mode). • Each time you press the button, the Reverse Mode changes as follows: REV.MODE 3 Close the cassette holder cover gently. 4 Press 2 3 TAPE. TAPE The unit automatically turns on and the tape starts playing. The tape direction indicator (3 or 2) flashes slowly on the display. • Each time you press the button, the tape direction changes: 3 : plays the front side. 2 : plays the reverse side. When the tape plays to the end, the deck automatically stops if the Reverse Mode is set to or . (See "To play both sides-Reverse Mode.") 17 : The deck automatically stops after playing both sides of the tape. Stops when playback in the 2 direction is finished. : The deck continues to play both sides of the tape until 7 is pressed. : The deck automatically stops after playing one side of the tape. The use of C-120 or thinner tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch-rollers and the capstans.