JVC FS-H35 Instruction Manual - Page 21
Recording
View all JVC FS-H35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Recording Continued IMPORTANT: • It should be noted that it may be unlawful to re- record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic embodied therein. • The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level. • If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit. • You can use type I tape for recording. To protect your recording Cassettes have two small tabs on the back to protect from unexpected erasure or re-recording. To protect your recording, remove these tabs. To re-record on a protected tape, cover the holes with adhesive tape. 2 Close the cassette holder gently and check the recording direction for the tape. • If the tape direction is not correct, press 2 3 TAPE twice then 7 to change the tape direction. • If you want to record on both sides of a tape, see "To record on both sides-Reverse Mode." 3 Start playing the source-FM, AM or auxiliary equipment connected to AUX jacks. • When the source is the CD player, see "Disc Direct Recording" on page 19. 4 Press ONE TOUCH REC (recording). ONE TOUCH REC The REC (recording) indicator lights up on the display and recording starts. • If no cassette is inserted when you press REC "NO REC" appears on the display. • If a protected tape is inserted when you press REC "NO REC" appears on the display. At the start and end of cassette tapes There is leader tape which cannot be recorded onto. Thus, when recording discs or radio broadcasts, wind the leader tape first to ensure that the recording will be made without any loss. To stop while recording, press 7. To remove the cassette, press ) on the unit. Recording on a Tape On the unit ONLY: 1 Put a recordable cassette in with the exposed part of the tape down. To record on both sides-Reverse Mode On the remote control ONLY: Press REV.MODE (reverse mode) REV.MODE repeatedly until or is lit. • When using the Reverse Mode for recording, lights up and start recording in the forward (3) direction first. Otherwise, recording will stop when recording is done only on one side (reverse) of the tape. 18