JVC FS-L30 Instruction Manual - Page 11

To remove the speaker grilles The speaker grilles are removable. Holes Projections To connect audio equipment with an optical digital input terminal You can record CD sound onto the connected digital equipment. OPTICAL DIGITAL OUT Protective plug Speaker grille Before connecting the other equipment, remove the protective plug from the terminal. To remove the speaker grille, insert your fingers at the top of the speaker grille, pull towards you. Then pull the bottom towards you. To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker. Connecting Other Equipment You can connect both of the analog and digital equipment. • DO NOT connect any equipment while the power is on. • DO NOT plug in any equipment until all connections are complete. To optical digital input Audio equipment with an optical digital input Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the OPTICAL DIGITAL OUT terminal. Now, you can plug the AC power cord. IMPORTANT: Be sure to check all connections to be done before plugging the AC power cord into a wall outlet. To connect audio equipment Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left audio signals, and red ones for right audio signals. R L AUX R L To audio output L Audio equipment R For playing the other equipment through this unit, connect between the audio output jacks on the other equipment and AUX jacks by using audio cords (not supplied). - 8 -