JVC GY-DV300U Using Streamcapture / Internet Explorer with a Microsoft® Me - Page 1
JVC GY-DV300U - 1/3" 3-ccd Dv Camcorder Manual
View all JVC GY-DV300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
? JVC PROFESSIONAL PRODUCTS COMPANY Subject: Application Note 5 Using Streamcapture/Internet Explorer with a Microsoft® Media Server This application note applies to both the GY-DV300/KA-DV300 and GY-DV5000/KADV5000 Streamcorders Although it is possible to stream video directly to the internet from the KA-DV300 or a locally attached computer, if you need to provide connectivity to more than a few users, you must use a Media Server. Described here, is a method for configuring a Media Server for streaming from a single GY-DV300/KADV300 or GY-DV5000/KA-DV5000. This can be done either with a second network interface in the server, or connecting through an infrastructure, as discussed here. NOTE: Even if you are using Internet Explorer and Streamcapture, you must first install Streamproducer on the server. 1. The cameras and servers' network interface cards should be configured with static IP addresses. If you only want to have clients accessing the video from the server, and not beable to connect directly to the camera, then either use two NICs in the server, or assign two IP addresses to the single NIC in the server. This is the method that will be illustrated here. Please refer to your NIC and operating system documentation for assigning multiple IP addresses to a network interface. In this case, the server should have a local and a global IP address. In this example the local IP address will be 10.0.10.1, and the global address is 206.229.18.130. The cameras address has been set to 10.0.10.2, in the same network group as the servers' local IP address. 2. Open Internet Explorer, put the IP address of the camera in the address bar andclick 'Go'. 3. After you've connected to the camera, click on STREAM CAPTURE to open the Streamcapturewindow. In order to use Streamcapture as a publishing point, you must change the streaming port from the factory default of port 80 to another free port. In this example, we'll change it to port 2170. Here's how: 4. Click on the 'VIEW' button to stop the video display. The button turns from green to grey. Page 1 of 4