JVC GZ-HM200AUS Guide Book - Page 25

ENGLISH RECORDING/ PLAYBACK Turning on the Face Detection Mode If you set this mode on, the camcorder detects the faces and adjust brightness and focus so that the faces are recorded clearly. Preparation: • Select ! or # mode. • Select the recording mode. Select . T W /  To turn off the face detection mode Select again. Using face detection in self-timer Preparation: • Select # mode. • Set [SELF-TIMER] to [FACE DETECTION]. 1) P ress SNAPSHOT. Faces are detected. Checking the Remaining Battery Power Preparation: • Disconnect the AC adapter from the camcorder. • Attach the battery pack. • Select the recording mode. For ! mode: Press INFO three times or INFO and then select ;. For # mode: Press the INFO button. DIRECT DISC $#66'4;%10&+6+10 INFO /#: 6+/' OKP QUIT  To return to the normal screen Select [QUIT] or press INFO. NOTE The recordable time display should only be used as a guide. It is displayed in 10-minute units. + 2) The still image is recorded 3 seconds after the face of the photographer is detected. Photographer + NOTE • If the LCD monitor is turned upside down, is not displayed. Change the setting when the LCD monitor is in the normal position. • You cannot turn on the face detection mode if [SELF-TIMER] is set to [FACE DETECTION]. (This is indicated by blinking.) • Depending on the condition, faces may not be detected. • If the face detection does not work correctly, turn off the mode before recording. 25