JVC GZ MC100 Instructions - Page 24

24 EN BASIC OPERATIONS Voice Recording Voice Playback 32 MODE Zoom Lever Recording Start/Stop Button Lock Button 1 Set the power switch to while pressing down the lock button located on the switch. 2 Press MODE to select . ● To change the playback speed, see pages 26 and 30. ● To switch the medium to be played back, see pages 26 and 27. 3 Press 49 to start playback. 4 To pause playback, press 49 again. Power Switch 49 To adjust the speaker volume During playback slide the zoom lever towards T to turn up the volume, or towards W to turn down the volume. To check the file information Press INFO when playback is paused. 65 1 Set the power switch to while pressing down the lock button located on the switch. 2 Press MODE to select . ● The camera is programmed to record voice on the medium in the CF slot by the factory preset. To switch the recording medium, see pages 26 and 27. ● To change the sound quality and recording level, see pages 26 and 30. 3 Press the recording start/stop button to start recording. 4 To stop recording, press the recording start/stop button again. The camera re-enters the record-standby mode. NOTE: For approximate recording time, see page 43. Deleting Files To select the file on the index display Slide the zoom lever to W when playback is paused so that the index display appears. Then press rt to select the file and press 49. Playback Operations High-Speed Search Press 3 or 5 during playback. Locating the start point of the file or skip the file Press 2 or 6 during playback or pause mode. Deleting Voice Files Press , then press rt to select [EXECUTE] and press 49. ● You can select the desired file to be deleted by pressing w e. ● To delete multiple files at once, see pages 26 and 29. If you press during recording mode, the file recorded most recently will be deleted. ● However, if the recording mode (video, still image or voice) is switched or the power is turned off and on again after recording, you cannot delete the file.