JVC GZ-MG35U Software Guide - Page 13
Connections (Windows®), Connecting the USB cable - battery
UPC - 046838022234
View all JVC GZ-MG35U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
NOTES: ● If PowerDirector/PowerProducer/PowerDVD have already been installed on the PC, uninstall them before installing the provided software: Video files captured with this camera can only be handled on the provided software. Please install and use the provided software (PowerDirector Express NE, PowerProducer 2 Gold NE, PowerDVD 5 NE). ● If you perform installation of a software that is already installed, uninstallation will start. In this case, perform the installation again after uninstallation is finished. ● Windows Messenger has to been closed during CyberLink DVD Solution installation. If it is running during installation, [Information] screen appears. Connections (Windows®) Connecting the USB cable Connect the USB cable to copy still images and video files in a recording medium to the PC. PC Camera To USB connector To close Windows Messenger: 1) While holding [Ctrl + Alt] key, click [Delete] key so that [Task Manager] appears. 2) Click [Processes] tab. 3) Select [msmsgs.exe]. 4) Click [End process]. USB cable To USB connector 1 To assure safety, make sure all units are turned off before making any connections. 2 Use the USB cable to connect the camera to the PC. NOTES: ● It is recommended to use the AC Adapter as the power supply instead of the battery pack. ● When the USB cable is connected, turning on or off the camera causes malfunctions of the PC. ● Connect the camera directly to the PC, not through the hub. ● Do not use an extension USB cable. - 13 -