JVC GZ-MG35U Software Guide - Page 17

Copying Edited Files back to Camera (Windows®) Disconnecting the USB cable (Windows®) To use the camera to play back video files (MPEG2 files, with the extension ".mpg") which have been edited using the provided software, change the file name to "MOV_xxxx.mpg" (where xxxx is a number) and move it to the [EXTMOV] folder. (੬ pg. 15) The following video files cannot be played back on the camera: ● Files which do not have correct file names ● Files which are not in MPEG2 format ● Files prepared on any application other than the provided software ● Edited files which were not produced on a JVC Hard Disk Camcorder. Also, be sure to turn off the SVRT function when editing the video files using PowerDirector Express NE. (Do not check the checkbox [Use SVRT to save rendering time].) How to play back video files from the [EXTMOV] folder on the camera On the index display of video files, press the recording start/stop button to display "MPG" on the screen. After that, follow the usual operation for playback. However, playlist functions are not available. Before loading or unloading recording mediums or turning off the PC, first disconnect the USB cable and turn off the camera. 1 Confirm that the ACCESS lamp on the camera does not light or blink. ● If the ACCESS lamp lights or blinks, wait until it is turned off before proceeding. 2 Double-click the [Safely Remove Hardware] or [Unplug or Eject Hardware] icon in the status bar. The [Safely Remove Hardware] or [Unplug or Eject Hardware] dialog box appears. Windows® XP: If not, wait a while then go to step 5. 3 Select [USB Mass Storage Device] or [USB Disk], and then click [Stop]. - 17 - CONTINUED ON NEXT PAGE