JVC GZ-R320D User Guide - Page 11
Inserting an SD Card
View all JVC GZ-R320D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Inserting an SD Card Insert a commercially available SD card before recording. Open the terminal cover. (Rear) Label Insert an SD card. * Before inserting the SD card, close the LCD monitor to turn off this unit. . o To remove the SD card Push the SD card inward once, then pull it out straight. NOTE Operations are confirmed on the following SD cards. Manufacturer Video A Still Image B Panasonic, TOSHIBA, SanDisk Class 4 or higher compatible SD card (2 GB)/ Class 4 or higher compatible SDHC card (4 GB to 32 GB)/ Class 4 or higher compatible SDXC card (64 GB to 128 GB) 0 When recording with video quality [UXP], Class 6 or higher is recommended. SD card (256 MB to 2 GB) / SDHC card (4 GB to 32 GB) / SDXC card (64 GB to 128 GB) 0 Using SD cards (including SDHC/SDXC cards) other than those specified above may result in recording failure or data loss. 0 This unit is not guaranteed to operate with all SD cards, even when using the ones specified above. Some SD cards may not work due to specification changes, etc. 0 To protect the data, do not touch the terminals of the SD card. 0 When using an SDXC card, check its compatibility with the OS of your computer by referring to the Detailed User Guide. 0 Do not use a miniSD card or microSD card (even if the card is inserted in an adapter). It may cause malfunction to the camcorder. EN 11