JVC HR-XVC29S Instruction Manual - Page 33
Elapsed Recording Time Indication, Tape Remaining Time, Second Audio Recording
View all JVC HR-XVC29S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Slide to the right. C.RESET ON SCREEN EN 33 Elapsed Recording Time Indication 1 Set the counter display. Press DISPLAY until a counter reading appears on the front display panel. DISPLAY 2 Reset the counter. Press C.RESET before starting recording or playback. ● The counter is reset to "0:00:00" and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback. Tape Remaining Time Press DISPLAY until the time remaining on the tape appears. ● The front display panel shows the tape remaining time with ":" blinking. ● By pressing the DISPLAY button, you can change display to show the channel position*, clock time, counter reading or tape remaining time. * Channel position is not displayed during playback. NOTES: ● When you press ON SCREEN, the on-screen display appears on the TV screen for 5 seconds, then the displays other than the counter disappears. To clear the counter display, press ON SCREEN. ● Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct. "- -:- -" may sometimes appear with ":" blinking, or the display may blink on occasion. Second Audio Recording This unit's built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set "2ND AUDIO RECORD" to "ON." (੬ pg. 60) NOTE: When the channel is changed on the unit; ● The "STEREO" indicator appears on the screen for about 5 seconds if the program is a stereo broadcast. ● The "SAP" indicator appears on the screen for about 5 seconds if the program is a SAP broadcast. ● Both indicators appear when a stereo program is accompanied by SAP sound.