JVC HR-XVC29S Instruction Manual - Page 52

52 EN Edit From A Camcorder Slide the TV/VCR/DVD switch on the Remote to the right. Recorder VIDEO input AUDIO input Audio/video cable (not supplied) To Audio/VIDEO Output connectors Camcorder Player Slide to the right. VCR AUX CH +/- EDITING (VCR DECK) You can use a camcorder as the source player and your unit as the recording deck. A Make connections. Connect the camcorder's AUDIO OUT and VIDEO OUT connectors to the unit's front panel AUDIO and VIDEO input connectors. ● When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your unit. B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VHS indicator lights up on the front display panel. On the Remote Press VCR so that the VHS indicator lights up on the front display panel. C Set the unit's input mode. Press AUX (number key "0") and/or CH +/- to select "F-1." D Set the edit mode. See "PICTURE CONTROL" on page 59. E Engage the Record Pause mode. Use 4 PLAY, FF 5, or 3 REW to locate the point where you start recording, then press and hold 9 PAUSE and press 7 REC to engage the Record Pause mode. F Start the camcorder. Engage the Play mode of the camcorder. G Start the unit. Press 4 PLAY to engage the Record mode of the unit. NOTES: ● All necessary cables can be obtained from your dealer. ● When you select "EDIT" to dub tapes in step D, be sure to select "NORM" after you finish dubbing the tapes. 3 PLAY 1 REW ¶ REC FF ¡ 8 PAUSE