JVC JY-VS200U JY-VS200U User Manual -- Pages 36-65 (1302KB) - Page 25

60 EN Power Switch SNAPSHOT Button Lock Button COPY - OF F ON Play/Pause Button (4/6) MENU Wheel Display SP 46 DUBBING (cont.) Dubbing Images Recorded On A Tape To A Memory Card Images can be dubbed from a tape to a memory card. 1 Load a memory card (੬ pg. 13) and cassette (੬ pg. 12). 2 Set the Power Switch to " " while pressing down the Lock Button. Open the LCD monitor fully or pull out the viewfinder fully. 3 Press the MENU wheel. The Menu Screen appears. Rotate it to select " VIDEO" and press it. The VIDEO Menu appears. 4 Rotate the MENU wheel to select " COPY" and press it. The Sub Menu appears. Rotate it to select "ON" and press it. Selection is complete. 5 Rotate the MENU wheel to select "1RETURN" and press it twice. The normal playback screen resumes. 6 To select a video image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback. 7 To start dubbing, press SNAPSHOT. The selected image is stored in the memory card. •" " blinks during dubbing. NOTES: ● If SNAPSHOT is pressed in step 7 when a memory card is not loaded, the message "COPYING F AILED" is displayed. ● If an image recorded on the tape using the WIDE mode (੬ pg. 30) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it. ● To use Playback Special Effects with a video image you wish to dub, perform up to step 7 using the remote control (provided) ( ੬ pg. 64). ● Images are dubbed in VGA file size. JY-VS200U EN 36-65 60 01.3.12, 7:06 PM