JVC KD-AVX11 Instructions - Page 52
Sound signals emitted through the rear terminals, Characters shown on the monitor - dvd cd
UPC - 046838027970
View all JVC KD-AVX11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
ENGLISH Sound signals emitted through the rear terminals Through the analog terminals (Speaker out/LINE OUT) 2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed. • DTS sound cannot be reproduced. Through the DIGITAL OUT terminal Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted. • To reproduce the multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set correctly. (☞ page 41) Playback disc D. Audio Output Stream Output signals Dolby Digital PCM Only DVD 48 kHz, 16/20/24 bits Linear PCM 96 kHz, Linear PCM 48 kHz, 16 bits stereo Linear PCM* 48 kHz, 16 bits stereo Linear PCM with Dolby Digital Dolby Digital bitstream 48 kHz, 16 bits stereo Linear PCM with DTS with MPEG Audio MPEG bitstream DTS bitstream 48 kHz, 16 bits stereo Linear PCM Audio CD, Video CD 44.1 kHz, 16 bits stereo Linear PCM / 48 kHz, 16 bits stereo Linear PCM Audio CD with DTS DivX with Dolby Digital DTS bitstream 48 kHz, 16 bits stereo Linear PCM Dolby Digital bitstream 48 kHz, 16 bits stereo Linear PCM with MPEG Audio 32/44.1/48 kHz, 16 bits Linear PCM MPEG1/MPEG2 MP3/WMA 44.1/48 kHz, 16 bits Linear PCM 32/44.1/48 kHz, 16 bits Linear PCM WAV 44.1 kHz, 16 bits stereo Linear PCM * Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs are not copy-protected. Characters shown on the monitor In addition to the roman alphabet (A - Z, a - z), the following characters will be used to show the various information on the monitor. • You can also use the following characters to assign titles. (☞ page 36). Upper and lower cases 52 Numbers and symbols