JVC KD-R730BT Instructions - Page 8

iHPoDd/RiPahodnieo™ tuner control This unit can control the JVC KT-HD300 HD Radio tuner box (separately purchased). Refer to the KT-HD300 instruction manual for installation and connection details.  HD Radio tuners can also tune in to conventional analog broadcasts.  Many HD Radio stations offer more than one channel of programming. This service is called multicasting.  To find HD Radio stations in your area, visit . Searching for a station BA  Select or .  Auto search. (Press) Manual search. (Hold) "M" flashes, then press the button repeatedly.  HD Radio station: "HD" lights up when receiving digital audio, or flashes when receiving analog audio.  Conventional FM station: "ST" lights up when receiving an FM stereo broadcast with sufficient signal strength. Searching for HD Radio stations only (Hold) "HD" flashes when a station is tuned in, and searching stops. Selecting an HD Radio multicast channel When receiving HD Radio multicast channels... Select your desired channel (HD1 to HD8). "LINKING" appears while linking to a multicast channel. Changing HD Radio reception mode While receiving an HD Radio broadcast, you can change the reception mode-digital or analog.  This setting does not take effect for the conventional FM/AM stations. 1 (Hold) 2 [AUTO] ANALOG DIGITAL - - -// Switches between digital and analog audio automatically. "HOLD" flashes if the radio station forces only analog reception. Tunes to analog audio only. "HOLD" lights up. Tunes to digital audio only. "HOLD" lights up. The setting automatically returns to when you tune in to another broadcast.  For storing stations in memory and selecting a preset station, ' page 6. 8 |‫ޓ‬ENGLISH