JVC KD-X260BT Quick Start Guide America - Page 7

Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (commercially available). Use only the specified screws. Using wrong screws might damage the unit. Removing the unit Wiring connection Antenna terminal Vehicle dashboard Fuse (10 A) Join the same color wires together. Factory wiring harness (vehicle) Custom wiring harness (separately purchased) Part list (supplied) (A) Faceplate (×1) (B) Trimplate (×1) (C) Mounting sleeve (×1) (D) Wiring harness (×1) (E) Extraction key (×2) Recommended connection a Light blue/yellow: To the steering wheel remote control adapter b Brown (not used) c Blue: To power antenna d Blue/white: To amplifier e Blue/white: Remote (12 V 350 mA) f Orange/white: Illumination g Yellow: Battery 12 V h Red: Ignition 12 V i Black: Ground j Gray ª, Gray/black ·: Front speaker (right) k White ª, White/black ·: Front speaker (left) l Purple ª, Purple/black ·: Rear speaker (right) m Green ª, Green/black ·: Rear speaker (left) 3