JVC KD-X260BT Quick Start Guide America - Page 9

GETTING STARTED 1 Cancel the demonstration When you turn on the power for the first time (or [FACTORY RESET] is set to [YES]), the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB" 1 Press the volume knob. [YES] is selected for the initial setup. 2 Press the volume knob again. "DEMO OFF" appears. 2 Set the clock and date 1 Press and hold . 2 Turn the volume knob to select [CLOCK], then press the knob. To adjust the clock 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob. Hour Minute 5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob. To set the date 7 Turn the volume knob to select [DATE SET], then press the knob. 8 Turn the volume knob to make the settings, then press the knob. Day Month Year 9 Press to exit. To return to the previous setting item, press . 3 Set the basic settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. To return to the previous setting item, press . [SYSTEM] [KEY BEEP] [FACTORY RESET] [CLOCK] [CLOCK DISPLAY] [ENGLISH] [ESPANOL] Default: [XX] (Not applicable when 3-way crossover is selected.) [ON]: Activates the keypress tone. ; [OFF]: Deactivates. [YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels. [ON]: The clock time is shown on the display even when the unit is turned off. ; [OFF]: Cancels. Select the display language for menu and music information if applicable. By default, [ENGLISH] is selected. 5