JVC KW-M150BT Instruction Manual America - Page 14

Learning function of steering remote, To adjust the parking guidelines

Page 14 highlights

External Components ÑÑTo adjust the parking guidelines ✎✎NOTE • Install the rear view camera in the appropriate position according to the instruction manual supplied with the rear view camera. • When adjusting the parking guidelines, make sure to apply the parking brake to prevent the car from moving. 1 Press the < > button. 2 Touch [Setting]. 3 Touch [System]. 4 Touch [T] or [U] of [Parking Guidelines] and set to [ON]. 5 Touch [Guidelines SETUP]. 6 Adjust the parking guidelines by selecting the [ ] mark. 7 Adjusting the position of the selected mark. Learning function of steering remote This function is available only when your vehicle is equipped with the electrical steering remote controller. 1 Press the < > button. 2 Touch [Setting]. 3 Touch [System]. 4 Touch [Steering Remote]. 5 Touch the function you want to set. 6 Press and hold the steering remote controller button. ✎✎NOTE • You can have the unit learned all buttons at a time. In that case, press the all buttons one at a time and after pressing all of them, touch [6] in Steering Remote Controller Setting screen. 7 Repeat steps 5 and 6 as necessary. 8 Touch [6]. ✎✎NOTE • Touch [Initialize] and then touch [Yes] to set all the settings to the initial default settings. A C D B Make sure that lines A and B are horizontally parallel, and that lines C and D are of the same length. ✎✎NOTE • Touch [Initialize] and then touch [Yes] to set all the marks to their initial default position. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

14
External Components
Ñ
To adjust the parking guidelines
NOTE
• Install the rear view camera in the appropriate
position according to the instruction manual
supplied with the rear view camera.
• When adjusting the parking guidelines, make sure
to apply the parking brake to prevent the car from
moving.
1
Press the <
> button.
2
Touch [Setting].
3
Touch [System].
4
Touch [
T
] or [
U
] of [Parking Guidelines] and set
to [ON].
5
Touch [Guidelines SETUP].
6
Adjust the parking guidelines by selecting the
 ] mark.
7
Adjusting the position of the selected mark.
A
B
C
D
Make sure that lines A and B are horizontally
parallel, and that lines C and D are of the same
length.
NOTE
• Touch [Initialize] and then touch [Yes] to set all the
marks to their initial default position.
Learning function of steering
remote
This function is available only when your vehicle
is equipped with the electrical steering remote
controller.
1
Press the <
> button.
2
Touch [Setting].
3
Touch [System].
4
Touch [Steering Remote].
5
Touch the function you want to set.
6
Press and hold the steering remote controller
button.
NOTE
• You can have the unit learned all buttons at a time.
In that case, press the all buttons one at a time and
after pressing all of them, touch [
6
] in Steering
Remote Controller Setting screen.
7
Repeat steps 5 and 6 as necessary.
8
Touch [
6
].
NOTE
• Touch [Initialize] and then touch [Yes] to set all the
settings to the initial default settings.