JVC KW-M150BT Instruction Manual America - Page 19
Speaker / X’Over setup, Listening Position / DTA, Sound Effect, OFF], [ON], Slope, Frequence, Level
View all JVC KW-M150BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Controlling Audio Speaker / X'Over setup 1 Press the button. 2 Touch [Speaker / X'Over]. 3 Touch the speaker to set up. Listening Position / DTA 1 Press the button. 2 Touch [Position / DTA]. 3 Touch [Delay]. 4 Touch [T] or [U] to adjust the delay time of the selected speaker. 4 Set each item as follows. Mode [ON] : Filter adjustment. [OFF], [ON] [OFF] : Turns off the filter. Slope Set a crossover slope. [R] [S] Frequence [R] [S] • High Pass Filter adjustment. (When Front or Rear is selected) • Low Pass Filter adjustment. (When Subwoofer is selected) Level [R] [S] Adjust the gain of the front speaker, rear speaker, or subwoofer. Phase Inversion Set the phase of subwoofer output. [ ] to shift the phase 180 degrees. (When Subwoofer is selected) [INITIALIZE] To clear the adjustment. 5 Touch [Level]. 6 Touch [T] or [U] to adjust the sound level of the selected speaker. Sound Effect 1 Press the button. 2 Touch [Sound Effect]. 3 Set each item as follows. Bass Boost Set the amount of bass boost [OFF], [1], [2], [3] Loudness [OFF], [ON] Set the amount of boost of low and high tones. [INITIALIZE] To clear the adjustment. English | 19