JVC LT32X585 Instructions - Page 13
Quick Setup, Connections, Remove the terminal cover
View all JVC LT32X585 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Quick Setup Connections Step 3 - Connecting your devices Remove the terminal cover There are connection terminals behind the covers on the left and right in the back of the TV. Remove these two covers before connecting an antenna or other devices. The covers can be removed by removing the hooks. When replacing the covers, place the side of the covers against the TV and insert the hooks. Note: • Leave the terminal covers off if they do not fit properly. Do not force to replace the covers. Doing so may damage the connection cables and covers. Connections Please follow the flow chart below to determine which connection setup is right for you. Then, refer to the appropriate diagrams to connect your television to other devices that you may have. After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV. A VCR is not necessary for operation of the television. If you follow these diagrams and the television does not work properly, contact your local cable operator. • To connect a DVD player, see Diagram #3. A DVD player is optional. • If you have a satellite television system, please refer to the satellite TV manual. Do you use a Cable TV Box? Yes No Do you have a VCR? Do you have a VCR? Yes No Diagram #2 Diagram #1 Yes No Diagram #3 Diagram #1 13