JVC LT32X585 Instructions - Page 31

Initial Setup Auto Tuner Setup The auto tuner setup function is described on page 23 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below. π† √® √® Press the MENU button To AUTO TUNER SETUP To operate To choose CABLE or AIR AUTO TUNER SETUP TUNER MODE CABLE Press the OK button to start PRESS OK TO START SELECT OPERATE MENU EXIT Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen. Press the Menu button when finished Channel Summary Channel summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or set the channel label as you like or prevent any unauthorized viewers from watching any or all 181 channels. Press the MENU button π† √® To CHANNEL SUMMARY To operate The Channel summary screen will now be displayed with the channels set to scan marked with an "√". You can delete channels from the scan by removing the "√". If any channels were missed during auto tuner setup and you wish to add them, you may by placing an "√" next to the channel number. CHANNEL SUMMARY CHNO. SCAN ID 01 02 MTV 03 04 A&E 05 E! SELECT OK OPERATE π†√® To the SCAN column Press the OK button to include or delete from scan CHNO. SCAN ID 06 HBO 07 L 08 09 10 MENU EXIT Press the MENU button when finished 31