JVC LT37X787 Instructions - Page 52

Onscreen Menus Digital-In The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2. π† √® π† Press the MENU button To DIGITAL-IN To enter To select AUTO, SIZE1 or SIZE2 Press the MENU button to finish INITIAL SETUP PREVIOUS DIGITAL-IN DIGITAL-IN1 AUDIO SIZE1 DIGITAL NEXT PAGE SELECT OPERATE (1/5) MENU EXIT Notes: • The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is input to the Digital-In terminal and the picture is being displayed on the screen. • You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the televison will select "SIZE1" or "SIZE2" automatically. Digital-in1 Audio This feature is used if you have a DTV or HDMI compatible component connected to your TV. π† √® Press the MENU button To DIGITAL-IN1 AUDIO To select ANALOG, DIGITAL or AUTO Press the Menu button when finished INITIAL SETUP PREVIOUS DIGITAL-IN DIGITAL-IN1 AUDIO SIZE1 DIGITAL Notes: • If you connect the HDMI device to the HDMI 1, choose DIGITAL. If you connect the DVI device to the HDMI 1, NEXT PAGE SELECT OPERATE (1/5) MENU EXIT choose ANALOG. • Refer to your DTV or HDMI component's instruction manual for more information. • When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically, depending on the audio input from the HDMI. • When you select DIGITAL, select PCM on Digital Sound menu. See page 54. 52