JVC NX-PN10 Instruction Manual - Page 24

Setting the Clock and Timer Setting the Clock Set the built-in clock before using Timer. • You can set the clock when the unit is turned on or on standby. Activate the clock setting mode. "ADJCLOCK" appears then the hour digit of the time indication flashes on the display. 1 • If you have already set the clock before, press the button twice to activate the clock setting mode. TIMER 1/TIMER 2/TIMER 3* Clock setting * See "Using Canceled Timer". 1 Set the hour while the hour digits of the time indication flashes on the display. 2 Set the minute while the minute digits of the time indication flashes on the display. 2 3 Select the day of the week. SUN DAY MON DAY TUE DAY WED DAY (Sunday) (Monday) (Tuesday) (Wednesday) THU DAY (Thursday) FRI DAY (Friday) SAT DAY (Saturday) Back to the beginning "CLOCK OK" appears and the built-in clock starts working. • To exit from the clock setting, press CLOCK/TIMER as required. • To correct a misentry during the process, press MENU/CANCEL. You can return to the previous step. • If a power failure occurs, the clock loses the setting and is reset to "AM12:00." You need to adjust the clock again. Using Timer Using Timer, you can wake up with music, etc. • Deactivate Motion Sensor when you use Timer (P.6) . • When using iPod or other equipment as the playback source, connect it to the unit beforehand. (P.13, P.19) • You can set Timer when the unit is turned on or on standby. • The unit is turned off automatically 2 hours after it is turned on by Timer. 1 Activate the timer setting mode. "TIMER 1," "TIMER 2" or "TIMER 3" appears on the display. 20