JVC QX5HD Instruction Manual - Page 37
Exposure Control
UPC - 046838158735
View all JVC QX5HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
EN 37 Exposure Control If the subject is predominantly white, black, red, etc., the resulting picture may be underexposed (too dark). In such a case, it is necessary to use the exposure control to restore the picture to a more realistic image. With this camera, you can make this adjustment by up to +/-2 iris steps in units of 0.5EV (exposure value). 2 3,4 1 SET OFF4 M V (-2EV) (+2EV) 1 Turn the Power dial to "M"or "V". •Hold the Lock button down while turning the Power dial. 2 Press the Exposure control button (+/-), and then press the w e button within 3 seconds. •Press the e button to cycle through the following modes: -2 → -1.5 → -1.0 → -0.5 → 0 → +0.5 → +1.0 → +1.5 → +2.0 (Darker to brighter) •Press the w button to cycle through the modes in the opposite direction. 3 Point the lens at the subject, position yourself, and half-press the Shutter button. •The camera will continue to focus on the subject while the button is half-pressed. The shoot standby lamp (green) flashes. •To display the image on the LCD screen while shooting, press the DISPLAY button. 4 Press the Shutter button all the way to take the picture.