JVC QX5HD Instruction Manual - Page 50

50 EN MANUAL SHOOTING (cont.) Shooting Film (Film Copy Mode) (GC-QX5HD only) You can use the film copying adapter (provided; see page 49) to take photos of images already on film. 4 532 1 M V SET OFF4 FILM COPY SETTING FRAME QUALITY Q. REVIEW FILM PRO STILL W. BALANCE SENS. CLEAR 2032x1536 FINE ON NEGA FILM 6M PRO S AUTO 80 EXE 1 Turn the Power dial to "M". •Hold the Lock button down while turning the Power dial. 2 Select "FILM" with the MODE switch. •"FILM" appears on the LCD panel. 3 Use the ZOOM lever to adjust the size of the subject. •The camera automatically enters macro mode and the zoom range is restricted. •Move the film holder left or right as needed to adjust the image. 4 Press the DISPLAY button until the FILM COPY SETTING screen appears. 5 Press the r t w e button to select the film copy setting. •Press the r t w e button repeatedly to cycle through the following modes: FRAME: Selects the size of the picture. QUALITY: Selects the picture quality. Q. REVIEW: Selects whether to display the photographed picture on the LCD. FILM: Selects either negative or positive. PRO STILL: Selects the photography mode. W. BALANCE: Sets the white balance in accordance with the film. SENS.: Selects the film sensitivity. CLEAR: Returns to the default settings. 6 Set the light source behind the film copying adapter. •If using a fluorescent light (20 - 40 W) as backlighting, set it about 10 - 20 cm (4" - 8") behind the film. •If using natural light (40 - 100 W) as backlighting, set it about 20 - 30 cm (8" - 12") behind the film. •Be careful when using hot light sources for long periods of time. Heat can easily damage film and picture quality.