Jabra BT3010 User Manual - Page 6

Fig. 3 1 2 english Use only the charger provided in the box - do not user chargers from any other devices as this may damage your headset. Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month. Turning your headset on and off • Press the answer/end button until you see a burst of flashes on the indicator light (LED) to turn your headset on. • Press and hold the answer/end button until you see a burst of flashes on the indicator light (LED) to turn the headset off. Please note that the LED indicator light turns off after 1 minute to save battery. Headset is still active, and light will flash again after tap on the answer/End button or any call activity. To check if the headset is on, tap the answer/end button once - the LED indicator light will flash, if the headset is on. Pairing it with your phone Headsets are connected to phones using a procedure called 'pairing'. By following a few simple steps, a phone can be paired with a headset in a matter of minutes. (See fig. 4) 1. Put the headset in pairing mode • When you turn on your Jabra BT3010 for the first time, the headset will automatically start up on pairing mode - i.e. it is discoverable for your phone. When the headset is in pairing mode the LED is constantly lit. Jabra BT3010 Bluetooth headset